help me plumb this regulator

[amishland]

I bought this regulator a year ago and I am ready to get off of my lazy ace and plumb it up.

I plan on buying fresh tubing and was wondering if there was a consensus best tube out there? should I go oetiker style or worm clamps?

I was also thinking of buying new beverage tube as well, I know it need to be a different tube any recos here also?

my intention was to put a wye splice on the low pressure side. so I could force carb one while serving two kegs. or serve two normal carb levels and one high cab level.

 

[smakudwn]

I use the red tubing i got from Keg Connections and worm clamps, works just fine.

 

[Arkador]

+1 on the red tubing for gas, it also helps you identify what tubing is which from several feet away. And go worm clamps, the oetiker style are not reusable, and a pain to fit without a special tool.

for beverage, use at least 5feet of 3/16 beverage line. Since you are doing a fresh build, go ahead and do 8feet for each product, you can cut it down if you want less. You cannot add more if you find 5feet is too short for you.

 

[amishland]

I have been browsing micromatics website, and they say do not use more than 5 foot of 3/16" line.

I need to read all the stickies.