Grolsch gaskets

[Kentuckylad]

Greetings from Kentucky!
I am new to the forum, but not new to home brewing.
Usually, I bottle in half gallon growlers or corny kegs. I have a couple 2 liter growlers with swing lids. The gaskets are about 2.2" OD and 1.05" ID and I have found several suppliers of those. However, I have a 1.5 liter growler for which the gasket is 1.25" OD and 0.45" ID. I cannot find a supplier of those.
Anyone have some advice on this matter?
Slianthe,
Ray

 

[TrustyOlJohnson]

If you can't find them commercially available, I would seek out a rubber supply store.. I have one locally and they provide all things rubber to industrial and commercial applications.. (including foodsafe) I have given them homebrew to help me solve my "brewerys" rubber problems (gaskets, orings, seals and such)

 

[Hwk-I-St8]

If it's truly the size of a Grolsch gasket, they are available online. I use them to help secure my guitar strap (a straplock without having to mod the guitar).

Also, my LHBS sells them. Let me see if I can find where I got them...

 

[Hwk-I-St8]

Here's one:

https://bellsbeer.com/store/products/Grolsch-Gaskets-%252d-100-count.html?gclid=CJjHjqmLsdQCFQkMaQodtRIKcg

 

[Kentuckylad]

Trustyoljohnson and Hwk-i-st8, thanks for the responses. I may need to have them made. The ones I need are between the readily available pint bottle size and the 2 liter growler size. Can't fine them available commercially anywhere.

 

[brandonlovesbeer]

My local HB store has them for sale. And I've seen them online at places like Northern brewer etc

 

[Dog House Brew]

Trustyoljohnson and Hwk-i-st8, thanks for the responses. I may need to have them made. The ones I need are between the readily available pint bottle size and the 2 liter growler size. Can't fine them available commercially anywhere.

Not even at McMaster-Carr? If you haven't looked there that is

 

[Clearbeer1]

hey Kentuckylad I have bag of gaskets that I purchased several years ago. If you send me your address via a pm I wll mail you some to try.
Clearbeer1

 

[Kentuckylad]

Clearbeer1, if you have the readily available small gaskets for pint bottles, I have those. And, I can get the large ones for 2 liter growlers. But, the one I am looking for is between those two in size. Can't find them.
Thanks for your response!

 

[Clearbeer1]

Kentuckylad
Yes, what I have will only fit the smaller lids but Morebeer.com has the gaskets listed. I copied the info here.
Morebeer.com Item # GL521
Replacement Gasket for 2l Swing Top Growler
Currently-Out of Stock
$1.99 ea.