• If you have bought, sold or gained information from our Classifieds, please donate to HomeBrewTalk and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Please visit and share your knowledge at our sister communities:
  • If you have not, please join our official Homebrewing Facebook Group!

    Homebrewing Facebook Group

New York Gear Sale

Homebrew Talk

Help Support Homebrew Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Have had some stalled sales so I wanted to put this out there again. I have all the equipment broken down and ready to ship. Juts PM with address and zip code and i'll get the stuff out same day.

View attachment 412488

1.5" Full Thread Nipples (2) - $3 each
Stainless Whirlpool Inlet with Compression Fitting (1) - $9
1/2" NPT to 1.5" TC (2) - $5 (includes 2 TC Gaskets) each
Triclover Clamps (2) - $5 each
1/2" Mini Ball Valve (1) - $4
1/2" NPT Male Camlock Fittings (4) - $2.50 each
1/2" NPT Female Camlock Fittings (3) - $2.50 each
1/2" Washers (4) - $1.50 each
1/2" NPT Female/Male Elbow (1) - $2.50
High Flow 90 (1) - $3
1/2" NPT Male to 3/8" Barb Elbow (1) - $1.50
1/2" Elbows (1) - $2 each
3/8" Barb Camlocks (7) - $3.50 each
1/2" NPT Female Camlocks (2) - $3.50 each
Camlock Caps (2) - $3 each
3/8" Barb to Camlock Fitting (1) - $2
1/2" Locknuts (14) - $1 each
10" Thermowell (1) - $5
1/2" Ball Valve (1) - $5
Locline Circle Flow Kit (1) - $12
12v 100C Solar Pump w/ Camlock Fittings (1) - $20
1/2" NPT Tee (2) - $2 each

View attachment 412489

Raspberry Pi 3b w/ case, hookup wires, SSRs, Preloaded SD Card - $50
4 One-Wire Sensors, Bored Through Compression and Long Tubes - $25

View attachment 412490

Waring Pro Burner with Bypassed Thermostat - $25

View attachment 412491

Cereal Killer Grain Mill - $80

View attachment 412492

Capper and Red, Yellow, Blue and White Caps - $22

View attachment 412493

Aquarium pump with extra sterile filter - $15
 
Have had some stalled sales so I wanted to put this out there again. I have all the equipment broken down and ready to ship. Juts PM with address and zip code and i'll get the stuff out same day.

View attachment 412488

1.5" Full Thread Nipples (2) - $3 each
Stainless Whirlpool Inlet with Compression Fitting (1) - $9
1/2" NPT to 1.5" TC (2) - $5 (includes 2 TC Gaskets) each
Triclover Clamps (2) - $5 each
1/2" Mini Ball Valve (1) - $4
1/2" NPT Male Camlock Fittings (3) - $2.50 each
1/2" NPT Female Camlock Fittings (1) - $2.50 each
1/2" Washers (4) - $1.50 each
1/2" NPT Female/Male Elbow (1) - $2.50
High Flow 90 (1) - $3
1/2" NPT Male to 3/8" Barb Elbow (1) - $1.50
1/2" Elbows (1) - $2 each
3/8" Barb Camlocks (4) - $3.50 each
1/2" NPT Female Camlocks (2) - $3.50 each
Camlock Caps (2) - $3 each
3/8" Barb to Camlock Fitting (1) - $2
1/2" Locknuts (14) - $1 each
Locline Circle Flow Kit (1) - $12
12v 100C Solar Pump w/ Camlock Fittings (1) - $20
1/2" NPT Tee (2) - $2 each

View attachment 412489

Raspberry Pi 3b w/ case, hookup wires, SSRs, Preloaded SD Card - $50
4 One-Wire Sensors, Bored Through Compression and Long Tubes - $25

View attachment 412490

Waring Pro Burner with Bypassed Thermostat - $25

View attachment 412491

Cereal Killer Grain Mill - $80

View attachment 412492

Capper and Red, Yellow, Blue and White Caps - $22

View attachment 412493

Aquarium pump with extra sterile filter - $15

See updated quantities above
 
9/19/2017 - UPDATED LIST

Had some sales and here is a revised list:

View attachment 412488

1.5" Full Thread Nipples (1) - $3 each
Stainless Whirlpool Inlet with Compression Fitting (1) - $8
1/2" NPT to 1.5" TC (2) - $5 (includes 2 TC Gaskets) each
Triclover Clamps (2) - $5 each
1/2" Washers (1) - $1.50 each
1/2" NPT Female/Male Elbow (1) - $2.50
1/2" NPT Male to 3/8" Barb Elbow (1) - $1.50
1/2" Elbows (1) - $2 each
3/8" Barb Camlocks (4) - $3.50 each
1/2" NPT Female Camlocks (2) - $3.50 each
3/8" Barb to Camlock Fitting (1) - $2
1/2" Locknuts (10) - $1 each
12v 100C Solar Pump w/ Camlock Fittings (1) - $20


View attachment 412489

Raspberry Pi 3b w/ case, hookup wires, SSRs (1 DC and 1 AC), Preloaded SD Card - $47
4 One-Wire Sensors, Bored Through Compression and Long Tubes - $22

View attachment 412490

Waring Pro Burner with Bypassed Thermostat - $25

View attachment 412491

Cereal Killer Grain Mill - $80

View attachment 412492

Capper and Red, Yellow, Blue and White Caps - $20

View attachment 412493

Aquarium pump with extra sterile filter - $15
 
UPDATE - 9/26/17

View attachment 412488

1.5" Full Thread Nipples (1) - $3 each
Stainless Whirlpool Inlet with Compression Fitting (1) - $9
1/2" NPT to 1.5" TC (2) - $5 (includes 2 TC Gaskets) each
Triclover Clamps (2) - $5 each
1/2" Washers (1) - $1.50 each
1/2" NPT Female/Male Elbow (1) - $2.50
1/2" NPT Male to 3/8" Barb Elbow (1) - $1.50
1/2" Elbows (1) - $2 each
3/8" Barb Camlocks (4) - $3.50 each
1/2" NPT Female Camlocks (2) - $3.50 each
3/8" Barb to Camlock Fitting (1) - $2
1/2" Locknuts (10) - $1 each
12v 100C Solar Pump w/ Camlock Fittings (1) - $20

View attachment 412490

Waring Pro Burner with Bypassed Thermostat - $25

View attachment 412491

Cereal Killer Grain Mill - $80

View attachment 412492

Capper and Red, Yellow, Blue and White Caps - $22

View attachment 412493

Aquarium pump with extra sterile filter - $15
 
UPDATE - 10/4/17

View attachment 412488

1.5" Full Thread Nipples (1) - $3 each
Stainless Whirlpool Inlet with Compression Fitting (1) - $9
1/2" NPT to 1.5" TC (2) - $5 (includes 2 TC Gaskets) each
Triclover Clamps (2) - $5 each
1/2" Washers (1) - $1.50 each
1/2" NPT Female/Male Elbow (1) - $2.50
1/2" NPT Male to 3/8" Barb Elbow (1) - $1.50
1/2" Elbows (1) - $2 each
3/8" Barb Camlocks (4) - $3.50 each
1/2" NPT Female Camlocks (2) - $3.50 each
3/8" Barb to Camlock Fitting (1) - $2
1/2" Locknuts (10) - $1 each

View attachment 412490

Waring Pro Burner with Bypassed Thermostat - $25

View attachment 412491

Cereal Killer Grain Mill - $80

View attachment 412493

Aquarium pump with extra sterile filter - $15
 
how much for everything and would you drive half way to LI?
 
how much for everything and would you drive half way to LI?

If by LI you mean Long Island, I wouldn't be interested. The prices are firm so just add it all up and we can talk shipping if you are interested.
 
Any idea on weight and size of package?

If I had to guess I bet it would fit the $12 flat rate box for shipping. Weight is irrelevant with those flat rate cartons. I’d have to check though.
 
how many sets of cams do you have and what are their end connections?

UPDATE - 10/4/17

View attachment 412488

1.5" Full Thread Nipples (1) - $3 each
Stainless Whirlpool Inlet with Compression Fitting (1) - $9
1/2" NPT to 1.5" TC (2) - $5 (includes 2 TC Gaskets) each
Triclover Clamps (2) - $5 each
1/2" Washers (1) - $1.50 each
1/2" NPT Female/Male Elbow (1) - $2.50
1/2" NPT Male to 3/8" Barb Elbow (1) - $1.50
1/2" Elbows (1) - $2 each
3/8" Barb Camlocks (4) - $3.50 each
1/2" NPT Female Camlocks (2) - $3.50 each
3/8" Barb to Camlock Fitting (1) - $2
1/2" Locknuts (10) - $1 each

View attachment 412490

Waring Pro Burner with Bypassed Thermostat - $25

View attachment 412491

Cereal Killer Grain Mill - $80

View attachment 412493

Aquarium pump with extra sterile filter - $15

See Above
 
1/2" NPT Female/Male Elbow (1) - $2.50
1/2" NPT Male to 3/8" Barb Elbow (1) - $1.50
3/8" Barb Camlocks (4) - $3.50 each
1/2" NPT Female Camlocks (2) - $3.50 each
3/8" Barb to Camlock Fitting (1) - $2

I’m interested in these, looks like they add up to $27. Shipping can’t be too much, right? PM me the total along with payment details,
Thanks
 
UPDATE - 10/16/17

View attachment 412488

1.5" Full Thread Nipples (1) - $3 each
Stainless Whirlpool Inlet with Compression Fitting (1) - $9
3/8" Barb Camlocks (4) - $3.50 each
1/2" NPT Female Camlocks (2) - $3.50 each
3/8" Barb to Camlock Fitting (1) - $2
1/2" Locknuts (5) - $1 each

View attachment 412491

Cereal Killer Grain Mill - $75
 
Back
Top