Faucets directly connected to kegs

[Beeropolis]

Anyone know where I can get attachments to connect my faucets directly to the liquid out connect or know what's needed to DIY this?

 

[samc]

They have some here http://www.williamsbrewing.com/BEER_FAUCETS_C65.cfm and you could probably get them many other places.

 

[wildwest450]

http://lmgtfy.com/?q=beer+faucet+to+liquid+out

 

[GilaMinumBeer]

http://lmgtfy.com/?q=beer+faucet+to+liquid+out

Nice carb chart.

 

[mmb]

http://lmgtfy.com/?q=beer+faucet+to+liquid+out

Nice carb chart.

First link is Kegkits.com for me. Boooo.

 

[wildwest450]

First link is Kegkits.com for me. Boooo.

You get the point.

 

[mmb]

You get the point.

I liked the days when one could wax philosophically about how great the site admins were to provide a link that could answer practically any question ever asked on the forum.

lmgtfy.com takes all the fun out of being an ass.

 

[Beeropolis]

http://lmgtfy.com/?q=beer+faucet+to+liquid+out

Awesome. Thanks for the sarcasm. No need to be a ******.

I did google it. I guess I didn't have the right combination of words to get that result. I kept getting faucets and clamps and shanks and disconnects as separate pieces.

Mostly I'm interested if it's possible to DIY?

Thanks to everyone else.

 

[TXCrash]

Do keep in mind that unless you greatly decrease the CO2 pressure each time you pour a beer you'll end up with a glass full of foam (no restrictions between keg and tap). You'd be better off going with 10' of 3/16 line and a picnic tap.

 

[OntarioBeerKegs]

Get a threaded disconnect it will be more solid then barbed and make a trip to the hardware store with your faucet and and the disconnect. I made mine a horizontal unit that would go over the side of the keg because the first configuration vertical had way to much play on it from the connect to post.

 

[Beeropolis]

Do keep in mind that unless you greatly decrease the CO2 pressure each time you pour a beer you'll end up with a glass full of foam (no restrictions between keg and tap). You'd be better off going with 10' of 3/16 line and a picnic tap.

yeah, I wasn't gonna keep the gas-in line connected. I was just gonna attach them to an already charged keg. It's mostly so I can pull pints from kegs in queue while waiting for space to free up in the kegerator.

 

[Azharen]

They have a standard faucet adapter that replaces the barb on Ur Liquid QD. That's what I use. I think it comes with the faucet if U buy it. Mine did. Any place that sells kegging EQ should carry it. Hope this helps.

 

[Bobby_M]

I made up a few direct faucets by putting a 3" piece of 1/4" ID polyethylene tubing between the beer out QD and a picnic faucet. Extra points for dropping a few epoxy mixing cores down into your dip tube if you plan to dispense the whole keg that way.