brandonring
Active Member
- Joined
- Apr 6, 2016
- Messages
- 27
- Reaction score
- 6
Ok so I'm pretty shaken up. I knew I was no electrician going into this but I thought I had it wired correctly. I'm fine. Did not receive any shock.
I'm building a very simple electric HLT. I must have wired something wrong b/c when I flipped the switch on my project box, my box jumped from the table and the SSR inside was fried. The 30 amp breaker in the main panel had tripped but the 50 amp GFCI had not. Feel free to tear me a new one. I'm ashamed of myself and pretty flustered.
Here's my wiring diagram
Here's my list of materials.
http://www.lowes.com/pd_591488-427-3032WZ_0__?productId=50179201#img
http://www.amazon.com/gp/product/B0087O6T10/?tag=skimlinks_replacement-20
http://www.lowes.com/pd_423568-43469-2203___?productId=4013827&pl=1&Ntt=30+amp+dryer+outlet
I'm building a very simple electric HLT. I must have wired something wrong b/c when I flipped the switch on my project box, my box jumped from the table and the SSR inside was fried. The 30 amp breaker in the main panel had tripped but the 50 amp GFCI had not. Feel free to tear me a new one. I'm ashamed of myself and pretty flustered.
Here's my wiring diagram
Here's my list of materials.
http://www.lowes.com/pd_591488-427-3032WZ_0__?productId=50179201#img
http://www.amazon.com/gp/product/B0087O6T10/?tag=skimlinks_replacement-20
http://www.lowes.com/pd_423568-43469-2203___?productId=4013827&pl=1&Ntt=30+amp+dryer+outlet
Last edited by a moderator: