HalfAssBrewer
New Member
I bought this kit off Craiglist 3 years ago from a Restaurant equipment reseller, I never ended up building my kegerator (The Chest Freezer ended up staying a freezer for meat and chilling pint glasses) so *as far as I know* the equipment has never been used. It has however been removed from its packaging and shuffled around so there may be a few minor scratches, but the tower is has a brushed look so if there are cosmetic issues they are barely noticeable. It has most of what you need to build a Kegerator minus the chest freezer/air tank and Taps/Disconnects.
** TAP Handles SOLD**
Price Drop to $650
Price includes shipping to Continental US (Or if your outside the US, I'll spot the first $75, you make up the difference)
5 Tap Stainless Steel Tower
Manitowoc 5TRBSS 3" round base Tee Tower, It came pre-plumbed but would probably suggest replacing the lines back to the faucets as it has sat for a while and those of us who know beer, know cleanliness before all else! It has a copper loop for a glycol to keep your beer cold all the way to the faucet heads, has the rubber grommit for the base. All 5 faucets move freely but have never been pressure tested for leaks as I never hooked it up
Single Regulator:
Manitowoc Multiplex Part No: 00211302. Regulator comes pre-mounted on a galvanized backing plate and has a threaded Liquid disconnect for the associated keg
Double Regulator:
Manitowoc Multiplex Part No: 00211400. Regulators come pre-mounted on a galvanized backing plate and has two threaded Liquid disconnect for the associated kegs
Empty Beer Detector (Also called Foam on Beer [FOB]/ Foam on Line Detectors):
Manitowoc 00215709 There are 3 Empty Beer Detectors that come with this kit, They stop the flow once your keg is empty so that your beer lines stay full and they do not need to be re-primed when you switch kegs. This reduces the amount of foam that comes out when you switch kegs, They are awesome if you are keeping the same beer on a line continuously as you dont waste as much beer waiting for the foaming to stop, also reduces the amount of CO2 waste
TAP HANDLES WERE SOLD, Thanks kkoltunf!
** TAP Handles SOLD**
Price Drop to $650
Price includes shipping to Continental US (Or if your outside the US, I'll spot the first $75, you make up the difference)
5 Tap Stainless Steel Tower
Manitowoc 5TRBSS 3" round base Tee Tower, It came pre-plumbed but would probably suggest replacing the lines back to the faucets as it has sat for a while and those of us who know beer, know cleanliness before all else! It has a copper loop for a glycol to keep your beer cold all the way to the faucet heads, has the rubber grommit for the base. All 5 faucets move freely but have never been pressure tested for leaks as I never hooked it up
Single Regulator:
Manitowoc Multiplex Part No: 00211302. Regulator comes pre-mounted on a galvanized backing plate and has a threaded Liquid disconnect for the associated keg
Double Regulator:
Manitowoc Multiplex Part No: 00211400. Regulators come pre-mounted on a galvanized backing plate and has two threaded Liquid disconnect for the associated kegs
Empty Beer Detector (Also called Foam on Beer [FOB]/ Foam on Line Detectors):
Manitowoc 00215709 There are 3 Empty Beer Detectors that come with this kit, They stop the flow once your keg is empty so that your beer lines stay full and they do not need to be re-primed when you switch kegs. This reduces the amount of foam that comes out when you switch kegs, They are awesome if you are keeping the same beer on a line continuously as you dont waste as much beer waiting for the foaming to stop, also reduces the amount of CO2 waste
TAP HANDLES WERE SOLD, Thanks kkoltunf!
Last edited:
