mcangeli
Well-Known Member
- Joined
- Dec 26, 2012
- Messages
- 371
- Reaction score
- 58
On my way to converting three kegs to an all grain setup.
The weldless sight glass and spigot from brewhardware made it a snap!
I used about 5 of the reinforced discs on a dremel to cut the big hole and a step bit from Northern tools to drill the holes for the sight glass and spigot.
Next up are the HLT and mash/lauter tank.
The weldless sight glass and spigot from brewhardware made it a snap!
I used about 5 of the reinforced discs on a dremel to cut the big hole and a step bit from Northern tools to drill the holes for the sight glass and spigot.
Next up are the HLT and mash/lauter tank.