Converted keg

[mcangeli]

On my way to converting three kegs to an all grain setup.

The weldless sight glass and spigot from brewhardware made it a snap!

I used about 5 of the reinforced discs on a dremel to cut the big hole and a step bit from Northern tools to drill the holes for the sight glass and spigot.

Next up are the HLT and mash/lauter tank.

 

[charliehorse]

Nice but before you use it, you'll want to sand off the burs on the rim or you'll get blood in your beer.

 

[Rivenin]

that and also, use some bar keepers friend inside that keggle, it'll get those stains off in a jiffy

http://www.thekitchn.com/so-shiny-removing-stains-with-130261

 

[northcal]

Angle grinder will clean up that rough edge quick.

You gonna get a false bottom or brew in bags?

Looks good though.

 

[mcangeli]

Those photos were after the Bar keepers friend and 30 minutes of scrubbing. The previous owners weren't too kind to the kegs.

When I make the mash tun I'll put in a false bottom...

My plan is to eventually have a three keggle setup with the electric brewery hardware...