Cheap DIY Fermentor

[jtf3456]

How can I make a cheap DIY fermentor?

 

[bigbeergeek]

Sure. Go to your local mega-grocery store and hit the bakery. All the frosting for those plain sheet cakes comes in 5-6 gallon buckets that they will happily give to you for free at the end of the night. Wash it out, drill a hole in the lid and you're ready to go.

 

[Soldevi]

Go to your local Safeway or Albertsons and ask the bakery if they have any frosting buckets you can have. They usually do. I got two 3 1/2 gallon buckets with the lid that has the rubber gasket for free.

 

[bigbeergeek]

Beat ya

 

[jmprdood]

I buy 5G buckets (HDPE 2) at HD or Lowes (~$5 w/ lid) - drill and attach a spigot and strip thermometer ($5 on ebay) and you have a fermenter for less than $10 (fill to about 4 inches below the top and good for 5G of 1.040 beer, bigger beers need more head space so about 4 to 4.5 G) -- I don't use an airlock, just set the lid on loosely until the krauesen subsides then snap it down until fermentation is complete

 

[J187]

I buy 5G buckets (HDPE 2) at HD or Lowes (~$5 w/ lid) - drill and attach a spigot and strip thermometer ($5 on ebay) and you have a fermenter for less than $10 (fill to about 4 inches below the top and good for 5G of 1.040 beer, bigger beers need more head space so about 4 to 4.5 G) -- I don't use an airlock, just set the lid on loosely until the krauesen subsides then snap it down until fermentation is complete

Food grade??

 

[jmprdood]

Yep - have been brewing with for a few years - several threads on here about them...

 

[blizzard]

You could also use one of those 5G water bottles you get from the grocery store when you buy filtered or spring water from the machine. Rumor has it those are made by Better Bottle now. Look for a #1 or #2 on the bottom.

 

[GinSlinger]

Go to your local Safeway or Albertsons and ask the bakery if they have any frosting buckets you can have. They usually do. I got two 3 1/2 gallon buckets with the lid that has the rubber gasket for free.

Hrm, really? That's too bad (for me). I asked around, as I was looking for 3.5g and what they had were 1, 2, and 5g. I ended up ordering some FDA approved white buckets from usplastic.com (Lima, OH) for about $7 for bucket and lid in 3.5g (shipping for the three $5, so about $8.50--not cheap). I'm looking to do AG 2.5g brews, so I really wanted 3-3.5g but couldn't find anything "local." My LHBS guys will drill all the holes for free (two lids, one bucket--airlocks on two fermenters and one bottling bucket) if I'll buy the spigot and airlocks from them. Not terribly bad deal imo.

 

[Cosper123]

I'd just save up and buy a starter kit. They come with a lot of handy tools like a bottle capper, fermentation bucket (that you can later use for bottling bucket even if you upgrade), so on and so forth.

Really cheaper to buy the starter kits then get everything one at a time. But if going the minimalist approach check craigslist. I obtained two 6.5 and one 5 gallon carboys for 20 bucks.

And speaking of craigslist, it's a good place in general to look for starter kits or equipment in general of people that no longer brew for whatever reason. I have seen a lot of good deals on craigslist, just need to check it often.

 

[jmprdood]

^^^ Cheers bro. Whatever works for you - now make some beer!

 

[Transamguy77]

I'd just save up and buy a starter kit. They come with a lot of handy tools like a bottle capper, fermentation bucket (that you can later use for bottling bucket even if you upgrade), so on and so forth.

Really cheaper to buy the starter kits then get everything one at a time. But if going the minimalist approach check craigslist. I obtained two 6.5 and one 5 gallon carboys for 20 bucks.

And speaking of craigslist, it's a good place in general to look for starter kits or equipment in general of people that no longer brew for whatever reason. I have seen a lot of good deals on craigslist, just need to check it often.

CL is awesome! Some patience is needed though cause you need to look everyday but you will find something, that's where I bought my stuff in the beginning. Keep a look out here in the classifieds here too but you gotta be fast here it goes quick.

 

[bigbeergeek]

Really cheaper to buy the starter kits then get everything one at a time.

I disagree. Paying $90 for some vinyl tubing, plastic buckets, capper etc (and likely with NO kettle included) is a total rip off. I could produce a nearly identical start up kit for around half the price.

 

[jtf3456]

I went to two stores today and both of them said they don't give them away, they recycle them. I don't understand what the difference would be if they gave me a few. I'd be putting them to very good use.

 

[ReDim]

I was actually thinking of doing this:

I have a homedepot near by, but lowes or even sears will do.
A 5g bucket is $3-4 (they are usually food grade, but check)
http://www.homedepot.com/h_d1/N-5yc...splay?langId=-1&storeId=10051&catalogId=10053
A lid - $1.25
Airline tubing (don't know what it costs) $1
Aquarium Silicone - $1 (if you have a heat/glue gun that will do)


Drill the lid, glue the airline tubing, thow another end of the tubing into a 1 pint water bottle. --- DIY bubbler (air-lock)

See if you can find a lid that goes air-tight...

____________________________________________________________________
Plastics wrap that is used for food preservation makes an airtight seal, Cover a bucket with it and run airline tubing from it to a used soda can or bottle...

____________________________________________________________________

Premium 5 Gallon Buckets & Lids | U.S. Plastic Corp.

_____________________________________________________________________
Look into:
---Plastic or rubber storage bins----
They are not under $10, but have a larger capacity, like 25g etc...
_________________________________________________________________

I have plenty of stuff to convert into a fermentation chamber lying around

...Like a 75 gallon empty fish tank! I could get it drilled (easier to clean/sterilize) and ...
Well, I have nto figured out how to go about a secondary with this

_______________________________________________________________________________
5g plastic water carboy ? It comes with water for like $10 of which $5 is a deposit on the carboy ....

 

[ReDim]

Also, something like this may be helpful:
Safe Plastics: A Chart of Safe Plastics, Health Risks, and Glutathione

That home-depot bucket, the one I have and bought a couple of years ago is #2 HDPE, and most buckets like this are....

 

[Balto]

How are you guys brewing 5 gallon batches of beer in a 5 gallon bucket?

 

[MuchoGusto]

Also, something like this may be helpful:
Safe Plastics: A Chart of Safe Plastics, Health Risks, and Glutathione

That home-depot bucket, the one I have and bought a couple of years ago is #2 HDPE, and most buckets like this are....

The "list" you refer to is nothing but a "sky is falling" scare type web site that is completely ANTI-PLASTIC.

Even "PET" is evil as a class 1 plastic. Rubbermade approved food containers are class 5 (I have one in made hand at this moment) but are evil as well. Obviously, the web-site has an agenda.

 

[jmprdood]

How are you guys brewing 5 gallon batches of beer in a 5 gallon bucket?

Usually have to scale down to 4 or 4.5G batches, though lower gravity beers in the 1.040 range will work with a blow off tube. I'll fill the bucket to about 3-4 inches below the top (4.8G).

I don't use an airlock, just loosely set the lid on. I put he fermenter in my laundry sink, so if it spills over no worries. When krausen subsides I snap the lid on, wipe it up and let it go until fermentation is done. I have a spigot and bottle right from the primary.

 

[tbel]

3.5 gallon buckets are out there. I got one from a local store called "U-Bake" they make and freeze Crusts, cookies and other things of that type. They sell the used buckets. I believe I paid $2-$3 for it. Filled to the top it's actually 4gal. so I have a decent amount of head space for my 2.5gal batches (not that I do alot of them).
I've got to believe you can find some if you keep looking.



P.S. It's a class 5, just for the record. I believe (from the smell) they hold icing. It took a couple of soaks in oxyclean to get rid of the smell.

 

[Balto]

Usually have to scale down to 4 or 4.5G batches, though lower gravity beers in the 1.040 range will work with a blow off tube. When krausen subsides I snap the lid on, wipe it up and let it go until fermentation is done. I have a spigot and bottle right from the primary.

I bought 2 bottling buckets with lids, spigots, and airlocks for my fermentors. Basically doing the same thing. Couldn't see buying the kit as I'm going to keg.

These were the best price!

https://bellsbeer.com/store/products/Ale-Pail-%2d-6.5-Gallon-Bottling-Bucket-(with-spigot-hole).html

 

[Soldevi]

Wow, I didn't realize I had such a good find. It was too easy. Just walked in and asked, she went to the back and brought back two. lol

They are Ropak brand with a plastic handle.

 

[JoeyChopps]

Quick question this thread has inspired me. I got a free 3 1/2 galling bucket from wally that had icing in it. The question is it ok to ferment in it even though its type 5 plastic but its food grade?

 

[jonmohno]

I found and used alot of stuff not bought through homebrew supplies but i would also have to add over time the amount i did end up spending,well- i just dont really want to know.Its a hobby though, and a good cause.I depends how you look at it too you could spend alot of time and effort or gas getting stuff compared to having it with a visit or order.
I just spent time before i bought stuff figuring out what the best thing for me will work,for instance doing small batches because i have stovetop and 5 gallon pots wont boil( i think) I barely got 4 gallons in two pots boiling a few times though.Plus i just dont need that much beer anyway,unless i really like how a particular batch turned out.
I found 2 gallon wide mouth glass jars for 5 bucks at a what i thought were extinct Pamida store in a small town,couldnt resist ended up getting 3 and i was using a 2 gallon bucket,that has always been my bottleing bucket.6 gallons of glass jars for 15 bucks.
Really though i could have bought the 2 gallon bucket predrilled hole for bottleing for a dollar or two more compared to what i got at the depot,and then i had to get something to cut a 1 inch hole for the spigot- but again. Its a hobby..

 

[tbel]

Quick question this thread has inspired me. I got a free 3 1/2 galling bucket from wally that had icing in it. The question is it ok to ferment in it even though its type 5 plastic but its food grade?

That depends on who you ask I'm sure some one will show up to tell you you will die if you use it. Well, guess what your gonna die even if you don't! My thoughts are that if they are using it to for food to begin with then it's probably OK and I'm using one just like you describe.

 

[JoeyChopps]

Roger that I'm going for it for a week long primary

 

[bigbeergeek]

I think the only issue with #5 is long term storage/oxygen permeability.

 

[msujack]

I personally think getting a bucket and lid from the LHBS for $13 including the lid is cheap enough. The materials for the beer cost more than that, so if you are too strapped for the bucket, you might want to rethink brewing for a bit.

Not being snotty, I just don't think the price of a 5gal bucket is cost prohibitive compared to the other things going on.

 

[tbel]

I personally think getting a bucket and lid from the LHBS for $13 including the lid is cheap enough. The materials for the beer cost more than that, so if you are too strapped for the bucket, you might want to rethink brewing for a bit.

Not being snotty, I just don't think the price of a 5gal bucket is cost prohibitive compared to the other things going on.

I'll agree that the price of a bucket from LHBS is reasonable. But haven't found anyone locally that sells a 3.5 gal bucket, when I was looking i couldn't even find one on line. If you are doing a 2.5gal batch neither the 2 gal. nor the 6 or even 7gal buckets that are readily available will work.

I think the only issue with #5 is long term storage/oxygen permeability.

Definitely agree with that! After primary fermentation is done you should move it to a container better suited for the Long term such as the 3gal glass jugs that you can find all over the place. I don't think leaving it on primary for a couple of weeks in one of those buckets is going to hurt anything.

 

[hnsfeigel]

msujack and jonmohno have very good good points, sometimes it's just as easy and not any more expensive to just run to the LHBS. However... I am totally scouring around for cheap stuff to use as well. I skipped the kit and re-purposed a few things around the kitchen to get my first batch together. SWMBO isn't exactly thrilled about my new hobby and I can only spend a little at a time right now. If the ingredients are the expensive part for now, at least I'm brewing. As long as you get good food-grade buckets and clean/sanitize well you should be able to make good beer. I think for my first few batches, the least of my worries will be oxygen permeation in my fermenter.