Tpost704
Active Member
I am preparing for my first BIAB batch and was hoping for some input. I provided the recipe below. I will be mashing and dunk sparking with RO water. I am using Brew'n Water with the "Yellow Full" water profile as my target. Based on Brew'n Water, if i add 0.5 grams/gallon of calcium chloride, 0.2 grams/gallon of epsom salt, and 1 ml/gallon of lactic acid to 4.0 gallons of RO water in combination with my grain bill, my estimated mash ph will be 5.32. I was going to mash for 1 hour at 150 and then dunk sparge in 3 gallons plain RO water with no additions. Does this sound like a decent approach to this brew or are there other additions/tweaks you would recommend. As always, thanks for the input. Cheers!
****5 Gallon Batch****
Batch Size: 5.50 gal
Boil Size: 7.0 gal
Estimated OG: 1.040 SG
Estimated Color: 3.9 SRM
Estimated IBU: 21.5 IBU
Brewhouse Efficiency: 70.0 %
Boil Time: 60 Minutes
Ingredients:
------------
Amount
7.00 lb Pale Malt (2 Row) US (2.0 SRM)
0.75 lb Cara-Pils/Dextrine (2.0 SRM)
0.50 lb Caramel/Crystal Malt - 10L (10.0 SRM)
0.50 lb Vienna Malt (3.5 SRM)
0.25 oz Centennial [9.50%] (55 min)
0.25 oz Centennial [9.50%] (35 min)
0.25 oz Cascade [7.80%] (20 min)
0.25 oz Cascade [7.80%] (5 min)
1 Pkgs Nottingham (Danstar #-) (Hydrated)
Mash at 150 degrees for 60 minutes.
****5 Gallon Batch****
Batch Size: 5.50 gal
Boil Size: 7.0 gal
Estimated OG: 1.040 SG
Estimated Color: 3.9 SRM
Estimated IBU: 21.5 IBU
Brewhouse Efficiency: 70.0 %
Boil Time: 60 Minutes
Ingredients:
------------
Amount
7.00 lb Pale Malt (2 Row) US (2.0 SRM)
0.75 lb Cara-Pils/Dextrine (2.0 SRM)
0.50 lb Caramel/Crystal Malt - 10L (10.0 SRM)
0.50 lb Vienna Malt (3.5 SRM)
0.25 oz Centennial [9.50%] (55 min)
0.25 oz Centennial [9.50%] (35 min)
0.25 oz Cascade [7.80%] (20 min)
0.25 oz Cascade [7.80%] (5 min)
1 Pkgs Nottingham (Danstar #-) (Hydrated)
Mash at 150 degrees for 60 minutes.
Last edited: