Cannot find a deep enough enclosure

[Homer]

I'm building a fermentation temp controller with 2 stc-1000's (actually these might be the inkbird version), 2 switches and 2 indicators. My issue is the din rail 12 v power supply I bought is taller than the stc-1000 so I need a box (preferably plastic) that is maybe 5 or 6 inches deep. I've checked out all th e regular project boxes and even some steel pull boxes at homedepot, which all seem to be only 4 inches deep. Can anyone think of anything else I might be able to get fairly quick and doesn't cost more than $30?

Thanks

 

[Konadog]

Have you looked at McMaster Carrr, they might have what your looking for.

McMaster Carr Search "Plastic Boxes"

 

[Maylar]

Check DigiKey for project boxes. They have lots of them.

 

[mredge73]

Ammo box may work:
https://www.harborfreight.com/ammo-box-63135.html
https://www.harborfreight.com/50-Cal-Metal-Ammo-Can-63181.html


Plastic j-boxes:
https://www.homedepot.com/p/0-13-cu-ft-Junction-Box-R5133711/202043254

https://www.homedepot.com/p/Carlon-12-in-x-12-in-x-6-in-Junction-Box-Case-of-2-E989R-UPC/202206115

 

[flars]

I've purchased 6" × 6" × 6" work boxes at Menards for $12.

 

[narddawg314]

I've purchased 6" × 6" × 6" work boxes at Menards for $12.

This is a great option and what I have done