I have a 8 year old Summit kegerator. Been using it on and off. I can’t get the beer temp below 50 degrees. I’ve always had foamy beer. Recently I decided I need to figure out what’s going on.
-I replaced the thermostat, adjusted the torx screw to lower the temp
-changed out the faucets to Perlick with flow control
-installed a tower cooler
still not going the beer below 50 degrees and getting foamy beer. In the past I would just turn down the CO2 but that not the correct solution.
Thanks!
-I replaced the thermostat, adjusted the torx screw to lower the temp
-changed out the faucets to Perlick with flow control
-installed a tower cooler
still not going the beer below 50 degrees and getting foamy beer. In the past I would just turn down the CO2 but that not the correct solution.
Thanks!