Brewhemoth Black Friday Sale
- Thread starter JEBrew
- Start date
Help Support Homebrew Talk:
- Joined
- Dec 9, 2008
- Messages
- 559
- Reaction score
- 51
Brewer's Hardware should give the Brewhemoth guys a cut of their Weekend sales.
Brewer's Hardware should give the Brewhemoth guys a cut of their Weekend sales.
I was thinking the exact same thing! I spent 380 there because of the brewhemoth sale, basically all my savings went to BH.
$414 here......
They were sold out of these http://www.brewershardware.com/TC15VBFVPT.html butterfly valves so I still have to figure that out but I did get the trub filter http://www.brewershardware.com/FILTER1.html
so I can do this
https://www.homebrewtalk.com/f35/pr...ry-hopped-nice-clean-beers-brewhemoth-376383/ ..... excited is an understatement :rockin:
erikrocks
Well-Known Member
Did my bad influence work?
Nah, I couldn't pull the trigger. My Barley Crusher is on its last legs and I'm upgrading to a Monster Mill. Also need a motor and all the accessories to connect and slow it down. Hopefully this sale was so successful that Brewhemoth makes it an annual event...
![Craft A Brew - Safale S-04 Dry Yeast - Fermentis - English Ale Dry Yeast - For English and American Ales and Hard Apple Ciders - Ingredients for Home Brewing - Beer Making Supplies - [1 Pack]](https://m.media-amazon.com/images/I/41fVGNh6JfL._SL500_.jpg)
https://www.brewershardware.com/1.5-Tri-Clover-Butterfly-Valve-Squeeze-Trigger-TC10VBFVST1.html
I wanted these anyways........the sad thing is i will be retiring an HDPE conical and re using a few pieces parts.....and i still spent that much.
I wanted these anyways........the sad thing is i will be retiring an HDPE conical and re using a few pieces parts.....and i still spent that much.
Alright I spoke with Josh on the phone a little while ago, I had sent an email Monday and me being impatient figured I'd call them. As always Josh was very friendly and answered my question on how to go about paying for the two fittings I had forgotten to pay for.
During the call I asked how successful the sale had been and as I expected it was "four times what we expected". I placed my order around 12:10 am est and he told me there were four orders in front of me. For reference my order number was 541 and today when I placed the order to pay for the additional fittings it was 578.
I hope this info helps some people figure out where they are in line and let's all please be patient with the guys at Brewhemoth while they tackle this wonderful endeavor!
During the call I asked how successful the sale had been and as I expected it was "four times what we expected". I placed my order around 12:10 am est and he told me there were four orders in front of me. For reference my order number was 541 and today when I placed the order to pay for the additional fittings it was 578.
I hope this info helps some people figure out where they are in line and let's all please be patient with the guys at Brewhemoth while they tackle this wonderful endeavor!
- Joined
- Nov 1, 2010
- Messages
- 344
- Reaction score
- 28
They sent an email out to everyone yesterday talking about how it went over greater than they had expected. I was already expecting at least 21 days at the earliest. I forget my order number, but I received my confirmation email from them at 12:10 CST. It was 10pm PST when I ordered. Luckily I was on duty on the ship and had to be up at that time anyways. I figured it would be better to jump in first to order.
On another note, DO NOT ORDER FROM GLACIER TANKS. I ordered some stuff from Glacier Tanks that day and as of today it has still not shipped. I went ahead and had them cancel it and decided to spend my $300 on tri-clover fittings over at Brewers Hardware. Glacier's piss poor response was that they handle orders on a first come first serve basis. I don't see how three full business days go by without having someone grab some fittings and throw them in a box and ship it out. Brewers Hardware has a lightning quick turnaround compared to them. It's sad too, they won't get any business from me as I was looking at their BK and I am now going to spend an additional $400 at Brewers Hardware instead.
On another note, DO NOT ORDER FROM GLACIER TANKS. I ordered some stuff from Glacier Tanks that day and as of today it has still not shipped. I went ahead and had them cancel it and decided to spend my $300 on tri-clover fittings over at Brewers Hardware. Glacier's piss poor response was that they handle orders on a first come first serve basis. I don't see how three full business days go by without having someone grab some fittings and throw them in a box and ship it out. Brewers Hardware has a lightning quick turnaround compared to them. It's sad too, they won't get any business from me as I was looking at their BK and I am now going to spend an additional $400 at Brewers Hardware instead.
- Joined
- Dec 9, 2008
- Messages
- 559
- Reaction score
- 51
Glacier tanks is a fine operation. I've used them many times and they've always been prompt and helpful.
Just another man's opinion
Just another man's opinion
I got an email from Brewers Hardware today, four of the things i ordered are backordered. I guess they are moving their shop and can't weld for a while. Thankfully (hmmm...) I'm waiting 45 days for my brewhemths and won't need the fittings til them.
I wonder how many orders Brewers Hardware had last weekend due to the brewhemoth sale?
Today I started building my glycol chiller.....
I wonder how many orders Brewers Hardware had last weekend due to the brewhemoth sale?
Today I started building my glycol chiller.....
What did you order that needs to be welded?
thermowells. The site claimed they were backordered until 11/30. Still says that.....
Crap.... I was afraid of that.
I spoke with someone from brewershardware, sounds like they will be cranking them out in a few weeks... I really hope I can get them before new years day.
biertourist
Well-Known Member
I can't believe I missed this sale! It's going to be a sad, sad Christmas now...
; (
Adam
; (
Adam
I got mine today!! Just in time for the weekend. I was not expecting it that fast. They must be right on the orders. I am not sure what my order # is but I ordered it about 10:02 mountain time. I will be setting up tomorrow!!
So you ordered it an hour before the sale started @ 12 cst? Interesting.... unless you mean 10am MT on black Friday...
Either way congrats! Now hurry up and post some pics! :rockin:
So no shipping notification? Just merry Xmas when you got home??
Ok it must have been 11:02 mountain. I had it shipped to my work and I don't work in the office so I went to drop my stuff off and there it was. I will get some pictures up later tonight or tomorrow. Have to get the kids to bed first.....
LOL sooo when you say " put the kids to bed" I read *I'm sneaking the conical in so my wife doesn't see and I'm gonna pretend it's been there for years* gotcha!
Why do you think it showed up at my work......
LOL I got really lucky with my SWMBO...when I said I was going to buy one...she said "why don't you just get two, it's a great price"
- Joined
- Nov 1, 2010
- Messages
- 344
- Reaction score
- 28
Ha, so many times I have brewing parts shipped to friends or work, lol. I consulted her on this purchase though as it is a little too big to hide!
Well it's looking good. I have the fitting from Brewers Hardware I will be putting together tomorrow.
What size fitting is thAt above the cone? Looks great I can't wait to get mine!
1.5" for a temp probe. I also went with the mcmaster 1/2" spray valve so I can just use my existing pump, so that port may also be used for cleaning. I am going to get it all hooked up and see how good the spray is....
Sweet, you got what I got although I had an additional 1.5" fitting on the dome in addition to the 1" that's standard. What length termowell are you going to use? Congratulations again!
I ordered 6" thermowells.....I hope they don't hit the coil......
I got the 5". I have a side by side fridge I tore the center out of it. I had my 15 gallon plastic conical in their so this one should fit no problems. I have some support shelves I made for the old one I will have to remove. The fridge is setup with heat pads to control the temperature. I normally just stick the prob on the side of the fermenter but I also bought a BCS kit from ebrewsupply and my plan is to set it up for remote monitoring. With a 3 year old and a five month old I just have to find the time....
Some pics with the fitting on. You can see I am missing the glass in the sight glass. I need new gaskets....I ordered some I hope will work from St pats, Brewers Hardware does not sell them separately yet.
Similar threads
