- Joined
- Apr 23, 2013
- Messages
- 23
- Reaction score
- 1
So this is what I'm thinking for a brew stand design. It will be all electric, one pump. The mash tun and boil kettles tip forward. The tipper is a little different then usual, but I wanted it dump away from the stand a little more so I could get a bucket under and they were super simple. I don't have all the tubing and keggles drawn out, but it's the basic idea.
I wanted to leave the mash lower so I don't have to stand on a step stool to stir in the grains. Oh and the mash tun is a bottom drain.
I am looking for any input or if anyone sees anything glaringly wrong. I already have the steel. I want to start building it soon.
thanks
I wanted to leave the mash lower so I don't have to stand on a step stool to stir in the grains. Oh and the mash tun is a bottom drain.
I am looking for any input or if anyone sees anything glaringly wrong. I already have the steel. I want to start building it soon.
thanks
![brew-stand-61612.jpg](http://cdn.homebrewtalk.com/images/1/5/6/8/5/5/brew-stand-61612.jpg)
![brew-stand2-61613.jpg](http://cdn.homebrewtalk.com/images/1/5/6/8/5/5/brew-stand2-61613.jpg)