• Please visit and share your knowledge at our sister communities:
  • If you have not, please join our official Homebrewing Facebook Group!

    Homebrewing Facebook Group

Bottling time

Homebrew Talk

Help Support Homebrew Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

knickspree

Active Member
Joined
Mar 5, 2012
Messages
42
Reaction score
0
Location
Nome
I have a Saison going now on 3 weeks in the fermenter, the action has died down but still a little bit on the top, can I bottle it now?

Recipe basics was 10 lbs LME, 1 LB, danstar saison yeast ImageUploadedByHome Brew1395514231.212698.jpg


Sent from my iPhone using Home Brew
 
Looks can be deceiving. Stable gravity readings indicate when fermentation is over. Three weeks is typically long enough to complete fermentation.
 
What yeast? What gravity? What temp? Some strains can stall and that doesnt look like its dropped clear yet so without verifying gravity I wouldnt be so quick to bottle

Sent from my SM-T310 using Home Brew mobile app
 
Danstar saison....I don't do gravity readings...and it's been like room temps of 65-70 degrees...


Sent from my iPhone using Home Brew
 
Danstar saison....I don't do gravity readings...and it's been like room temps of 65-70 degrees...


Sent from my iPhone using Home Brew

Well then why ask for advice? If you dont take gravity readings and dont want to then youre just guessing. Good luck with that, it might bite you one day;)

Sent from my SM-T310 using Home Brew mobile app
 
I'm not asking for advice, I'm asking for opinions...why ask why someone's asking for advice? Your comment brang absolutely nothing to the conversation...:)


Sent from my iPhone using Home Brew
 
Do yourself a favor and start checking the specific gravity. The risk of bottle bombs is too great. (not that I know from experience or anything)

Sent from my GT-P3113 using Home Brew mobile app
 
I'm not asking for advice, I'm asking for opinions...why ask why someone's asking for advice? Your comment brang absolutely nothing to the conversation...:)


Sent from my iPhone using Home Brew


Opinion, advise? Semantics. I gave you my opinion prior-Some belgian strains tend to stall and you point blank said you don't take readings which in my book is poor practice and will bite you one day with bottle bombs. If you're so sure that 3 weeks is fine then go for it and good luck.

I personally don't brew that way. Maybe your asking the question raises enough doubt in your practice to start taking gravity readings:)


Sent from the Commune
 
Ok I will when I get my hands on a hydrometer again, I stopped doing measures cause I felt they weren't accurate....for example I did the coopers lager and it came out at 5.2% abv which doesn't make sense...I've used the "rule of thumb" measurement for a while and try to only use plastic to avoid bottle bombs...


Sent from my iPhone using Home Brew
 
Sorry duboman, I just like to argue since I use rogue brewing techniques that only an artist like Da Vinci would understand...I post messages on these forums to get my artwork critiqued...


Sent from my iPhone using Home Brew
 
I would never bottle before the krausen dropped and the beer cleared up. Do you have any way to warm it up? When I do Saisons, I put the fermentor in a 'swamp cooler' with an aquarium heater so I can keep it at 80F.

I haven't used the Belle Saison yeast yet but most Saisons like it warmer.
 
Bleme I feel the exact same way with the kraussen, just wanted one person to confirm my thoughts...I live in rural Alaska so it's hard simulate a warmer situation...however it has been steadily getting better, so I'm thinking in another week it'll be ready...


Sent from my iPhone using Home Brew
 
If you want to go off of the picture you provided, I personally would wait until all krausen has fallen and the top layer is clear before bottling. Give your FV a slight swirl (not introducing any o2 with the agitation). If the krausen completely falls after you have swirled it around, then bottle. You are not too far away IMO.

Personally, I do use a hydrometer and find it fairly accurate. Cheers!
 
Are U doing an extract kit? If so the OG is what ever the kit said unless U messed up the water level.

What ABV were U expecting?

What was the og & fg??

Oh yea U don't have a hydrometer. How did you figure the ABV on the lager and did U lager it?
 

Latest posts

Back
Top