BIAB question for PJ

[mrshaund]

I am planning to use the diagram below but was wondering if you have one that also has a timer, and possibly a parts list laying around for it, I was going through the threads looking for one last night but probably over looked it.

 

[P-J]

I am planning to use the diagram below but was wondering if you have one that also has a timer, and possibly a parts list laying around for it, I was going through the threads looking for one last night but probably over looked it.

I think this one is what you are looking for:

As always - click on the image to see (and save) a full scale diagram printable on Tabloid paper (11" x 17")



Tha parts are called out in the diagram foot notes and are mostly from Auber Instruments.

Hope this helps.

P-J

 

[mrshaund]

thank you very much

 

[lukez]

PJ will this diagram be what I'm looking for as well in terms of the timer? My post: https://www.homebrewtalk.com/f170/wiring-diagram-help-393115/

 

[P-J]

PJ will this diagram be what I'm looking for as well in terms of the timer? My post: https://www.homebrewtalk.com/f170/wiring-diagram-help-393115/

You could use it as the Timer function is fully illustrated.

I did see your posted diagram request when you first placed it. I opted to not participate and/or respond as I will not make drawings that implement Volt & Amp meter displays. I firmly believe that they are a huge waste of resources and serve no function what so ever except "bling". It is not for me. Plus it can be an expensive investment. For what?

Another piece of it is that it would require a huge investment of my time drawing it.

Short answer? No way.

Sorry.

The diagram I posted in this thread could/would suite your needs fairly well. It is what you were after - but - without the meters.

Wishing for your understanding.

 

[lukez]

Sure, your opinion and you can do whatever you want

Staying away from the meters, do I need 2 alarms like you illustrated there or can I somehow get away with the 1 alarm (already laid out and made holes in the panel). I do have a button that "silences" the alarm for achieving temp, does that mean it's completely silenced or if I wired it to the timer too it would activate again?

 

[P-J]

Sure, your opinion and you can do whatever you want

Staying away from the meters, do I need 2 alarms like you illustrated there or can I somehow get away with the 1 alarm (already laid out and made holes in the panel). I do have a button that "silences" the alarm for achieving temp, does that mean it's completely silenced or if I wired it to the timer too it would activate again?

If you wire the same alarm to activate from the timer I believe it will require a second switch.

 

[Chris7687]

Hey PJ, was hoping to get your insight on my eBIAB build. Got my kit from eBrewSupply.com and I am not doing everything the kit is provided. It calls for two pumps and a timer, which I am not looking to use. Is there anything I need to change up on it? I want to leave the option to put a pump in at a later time and I am going to leave space in the box for the switches, just at this moment I don't have the $300 extra to put into a pump and plumbing. Bought a pump for my aquaponic garden instead Also, in place of the Key starter coming off the first contractor, can I replace it with a 2-way switch and be fine?

Anyways, was hoping you could give this schematic a quick once over and let me know what ya think. Thanks in advance. Sorry to the OP, don't mean to threat jack ya. Just trying to make use of the already existing, current thread.