I picked up pretty old Beverage Air DD58 system from an old German restaurant that was closing. You can tell its old by the wood grain front to it. Nevertheless, before I bought it, it worked just fine. We got her home where I cleaned her up and plugged her back in. It ran overnight and cooled down to 39 degrees that following morning - so I was feeling pretty good about it. Spent about a month after that just redoing all of the seals and gaskets and converting the connections for home brew kegs. Once finished I fired her back up and now shes not cooling at all.
Compressor and both fans come on just fine. When you turn the Tstat to Off, compressor shuts off. I thought maybe it needed R12, so my neighbor gave me a hand with getting a can of that and we found the charging port and pumped it through last night. Unfortunatly it didn't help. The coils aren't getting hot / cold, no sweat, nothing.
Was curious if anyone had any ideas on what else I should be checking...?
Thanks,
Dave
Compressor and both fans come on just fine. When you turn the Tstat to Off, compressor shuts off. I thought maybe it needed R12, so my neighbor gave me a hand with getting a can of that and we found the charging port and pumped it through last night. Unfortunatly it didn't help. The coils aren't getting hot / cold, no sweat, nothing.
Was curious if anyone had any ideas on what else I should be checking...?
Thanks,
Dave