Best RO system for the money?

[mblanks2]

Back to the subject of RO systems...I have to say I am happy with the Buckeye system I recently bought. Rock-solid construction, uses standard filters, wastes a LOT less water than some of the other systems I've seen, and the output rate is exactly where it should be. I have a 75GPD unit, and with my line pressure and cold tap water this time of the year, it produces about 60GPD, which is spot on. And the price was right. I emailed a few questions that Russ responded to the next day. Good customer service.

Agree 100%! I'm perfectly satisfied with my system. Great service before and after the sale. Would refer anyone to Russ for valuable information and design of a new system.

 

[Homercidal]

That's okay, was never a part of this forum, just googled around and joined when I saw a topic I liked. I'll see if some other threads are a bit more friendly.

Don't want the impression this is mine either. I am just a prototype tester for them. I actually feel bad bc now they got bad rep going bc I might not be explaining it correctly.

Regardless, it worked for me, saw the Kickstarter figured it might be appreciated since $200 for a RO ain't bad. Y'all seem to have strong opinions so I'll leave you be.

Hydronix Water is a manufacturer.

http://www.hydronixwater.com/dl/HDN_Catalog_2015.pdf

Mike, you may want to be a bit more honest when describing your relationship with the company. Making claims that you are "...just a prototype tester for them." makes it sound as if you don't have a stake in the company, and didn't come here with the intention of advertising your own product (Which is frowned upon on this site).

Generally that kind of deceptive posting is frowned upon by the moderators and the membership.

If you got something to say, then at least be honest. You aren't gaining any points by trying to trick the people here. You're only making yourself appear dishonest.

 

[The_Bishop]

The criteria for 'best' is flawed. The waste ratio is end-user adjustable, and is highly dependent on the feed water quality and hardness. If you're not flushing with an adequate flow of water and your feed is hard, you'll foul the RO membrane.

 

[Buckeye_Hydro]

The criteria for 'best' is flawed. The waste ratio is end-user adjustable, and is highly dependent on the feed water quality and hardness. If you're not flushing with an adequate flow of water and your feed is hard, you'll foul the RO membrane.

Correctamundo!

 

[Ike]

And with a wave of my hand and a click of the mouse, the thread's yearlong slumber ends and it RISES ONCE AGAIN! BWAHAHAH!


To those who posted in this thread a while ago: still going good? How long (as in, how many gallons of RO water produced) do your filter sets last (I dig there are differences related to chemistry).

ALSO: Is anyone else bothered by the amount of water that is "wasted" to make a gallon of RO? I wasn't aware that was part of the process until just now. I like the idea of having RO "at the tap" and not having to recycle all the empty gallon jugs of distilled water I currently use, but don't relish the idea of flushing 4 gallons down the drain for each gallon of water I actually use. But...then again... what's the environmental impact of generating the heat required to boil the gallon of water I do use...

At the moment, I'm not sure it's worth the money: Figure a couple hundred bucks for the system, and even with a two year ROI I'd be looking at needing to brew 100 gallons/yr to break even ($1/gal for distilled h20 at the supermarket). That's before the cost of extra filters, although many kits include the first replacement set. I know I could do it even cheaper if I used the RO "vending" machines, but I have issues with those.

 

[Buckeye_Hydro]

And remember that having an RO system replaces the need to buy bottled drinking water

 

[andrewmaixner]

And with a wave of my hand and a click of the mouse, the thread's yearlong slumber ends and it RISES ONCE AGAIN! BWAHAHAH!


To those who posted in this thread a while ago: still going good? How long (as in, how many gallons of RO water produced) do your filter sets last (I dig there are differences related to chemistry).

ALSO: Is anyone else bothered by the amount of water that is "wasted" to make a gallon of RO? I wasn't aware that was part of the process until just now. I like the idea of having RO "at the tap" and not having to recycle all the empty gallon jugs of distilled water I currently use, but don't relish the idea of flushing 4 gallons down the drain for each gallon of water I actually use. But...then again... what's the environmental impact of generating the heat required to boil the gallon of water I do use...

At the moment, I'm not sure it's worth the money: Figure a couple hundred bucks for the system, and even with a two year ROI I'd be looking at needing to brew 100 gallons/yr to break even ($1/gal for distilled h20 at the supermarket). That's before the cost of extra filters, although many kits include the first replacement set. I know I could do it even cheaper if I used the RO "vending" machines, but I have issues with those.

my premium system from buckeye, with a booster pump, is only dumping 2.4gal per 1gal produced (6-7ppm), at about 97% rejection and 140gpd max flow rate.

Not cheep, but I was getting very tired of hauling almost 200lbs of water home from the store at a time. This is so much more convenient.

(If you are worried about the water waste environmental impact, you could run the waste to a storage tank and use it for something.)

 

[Buckeye_Hydro]

You can control the ratio of waste water to purified water - just talk with a trusted vendor before you tweak it.

Russ

 

[The_Bishop]

I'm running about 1.6:1 on my system with 5-6 tds, but it's hardly 'box stock' anymore and I live dangerously.

 

[Buckeye_Hydro]

The lower your hardness (or if you have a softener), the lower you can crank that ratio without prematurely toasting your membrane.

Russ

 

[The_Bishop]

Softener, auto flush valves, booster pumps... It all helps.

 

[MaxStout]

I still get about a 2:1 ratio of wastewater to RO with my Buckeye system. Checked it with a TDS meter: 4ppm, exactly the same as it was when I first set up the unit last winter.

I don't miss schlepping jugs of water from the store. Or wondering about the quality of the store water and when they last checked the filters. Or what and how much minerals they add "for flavor." Or how clean the machine's lines and taps are.