I can do a 10 gallon but it pushes it to limit. Close to boil over.
Bayou BIABer's - do you all agree the element must be used in a 1 gang outlet box, as the 2 gang outlet box setting won't allow the element enough room due to the basket insert?
Do you all think this pick up tube would fit? It seems it would be put the ball valve at about 4.5-5" up the side of the kettle.
So all my dreams of this new 82qt BIAB have been ruined with finding out the 82 kettle and basket is a "boil basket" and not a steam situated basket. This means the basket sits flush with the bottom.... $&#@!!!!!!!! Seriously! So I was wondering if any other BIAB 82'ers had any modifications they did to accomodate this? The BIAB is a short term set-up while I slowly acquire my parts to build a 3V system, but I still want to use it in the mean time!! Open to any and all suggestions. I was planning on cutting the holes in the basket to allow better circulation/flow, so I do not think legs will work. I could rig a pulley system to hold the basket off the bottom, but that seems risky if the pulley gives out and the basket drops on my heating element/pick up/ temp probe/etc.
So all my dreams of this new 82qt BIAB have been ruined with finding out the 82 kettle and basket is a "boil basket" and not a steam situated basket. This means the basket sits flush with the bottom.... $&#@!!!!!!!! Seriously! So I was wondering if any other BIAB 82'ers had any modifications they did to accomodate this? The BIAB is a short term set-up while I slowly acquire my parts to build a 3V system, but I still want to use it in the mean time!! Open to any and all suggestions. I was planning on cutting the holes in the basket to allow better circulation/flow, so I do not think legs will work. I could rig a pulley system to hold the basket off the bottom, but that seems risky if the pulley gives out and the basket drops on my heating element/pick up/ temp probe/etc.
If I have the breakers, then I do not need fuses is what you are saying. I am taking time and studying the prints, hence the questions I have posted to gain a better understanding of how I am wiring. Thanks for the concern.
Enter your email address to join: