Bayou Classic 44-QT Stainless Steel Stockpot w/spigot

[wilserbrewer]

Has anyone tried to put a heater element in that port? I'm looking to do eBIAB & this could be perfect.

[/

The welded fitting for the spigot is perfect for an element.

This is a perfect solution for a "plug and play" BIAB e-kettle w/ or w/out the steamer basket! Very interesting

 

[brewinsam]

How well does the element screw in? I have heard that the ports are a different type of thread and not ideal. Have there been any leaks with anyone who has done this yet with an element?

The welded fitting for the spigot is perfect for an element.

See my picture in post #21.

 

[Jps101]

Which heating element are you using?

 

[Jps101]

Take sammy33's before...

...my after:

The welded fitting for the spigot is perfect for an element.

Is that the element on what appears to be the back left of the picture? Also, what size element did you use. I am trying to make the leap in that direction. Thanks

 

[ScubaSteve]

Almost all the elements for brewing are 1" NPS (Straight thread, not Tapered). If you screw an element into that fitting, it should be fine with the help of a fair amount of teflon tape. I have also used silicone sealant in the place of the tape, and it works very well.

Plug n' play is nice if you're going for no frills. But, if you're going electric you may consider soldering more fittings in. It works great and makes a very strong joint. Plus you can set things up exactly as you like without having to pay a welder to do it.

 

[jmitchell3]

how did your BC brew kettle work out? I'm thinking of doing the same and installing the temp gauge and valve myself...