Another Brewtis10 Clone!

[HI_SALENITY]

I just wanted to post a couple of pics of my new brew stand I am building .
It is 1 1/2'' steel with 3 Banjo burners (Just like all the rest nothing really new)
I haven't got the other pump yet and I still need some hose/valve... I think I am going to use 1/2'' id silicone tubing with hose clamps unless someone points me in another direction .

I also am going to install a control panel for the pumps and to control the burners for the strike/mash/sparge so anyone with some advise on that would be great!

Another pic
http://img.photobucket.com/albums/v635/curt54321/brewtis10004.jpg

 

[HI_SALENITY]

I have been looking fore love... controllers probes solenoids all day and want to make sure I don't buy the wrong stuff . Can someone point me in the right direction.

 

[HI_SALENITY]

Will this work for my setup?
http://www.auberins.com/index.php?m...id=106&zenid=5511caf08459b4a00ec6ca1dc7633989
http://www.auberins.com/index.php?m...id=178&zenid=5511caf08459b4a00ec6ca1dc7633989

 

[PuckeredPenguin]

Salenity,

That PID will work just fine. You still need a probe, not just a SS weldable bung. This one will work just fine 1/4 NPT RTD PROBE

Also if you plan on setting up a semi-auto direct fire system, don't forget you are gonna need ASCO red hats or furnace valves which will require a 120 to 24 v transformer.

Take a look at Jlandin's build thread many of your questions will be addressed.

Nick