Background: Since I first tried Hopslam at the fancy-beer pub this past Spring, I've been reading up on all information possible on how to makes this, and thanks to HBT for providing the bulk of that information. Not just on recreating hopslam, but all the ins and outs of all grain brewing. This was my first time. The bubbler is bubbling. I have also been doing alot of research at the liquor store, trying all the crazy pales I could find (and afford), picking out what I liked or didn't like about each one, and looked up recipes for them to add to my quest of making a great pale ale.
Also, I don't have the fancy spreadsheet stuff, so I have to type the recipe out.
10 pounds pilsen malt
1 pound 20L crystal (I wanted 10l, but LHBS didn't have it)
2 pounds clover honey, generic (see note)
WL East Coast Ale
3.5 gallons 170F strike, mash started at 158 and slowly fell to 150 over the course of an hour.
2 gallons 200F batch #1 sparge
2 gallons 170F batch #2 sparge
6.5 gallons pre-boil at 1.024 @ 141F (adjusted to... 1.04something)
(all pellets)
1 oz cascade (7.2 AA) 60 min
1/2 cascade (7.2 AA) 15 min
1/2 amarillo (7.4 AA) 15 min
1 teaspoon irish moss 15 min
Dry Hop:
2 oz Simcoe (12 AA)
1/2 oz Amarillo (7.4 AA)
1/2 oz Cascade (7.2 AA)
Notes:
It took about an hour to chill to 100F, first time AG kinks getting worked out. The post-boil volume was 5.25 g in the fermentor. Next morning, the fermenter had cooled to room temp and yeast was pitched. After krausen formed, I topped off with 2 pounds of the honey mixed into 2 cups of boiled water which took me up to the 5.5 gallon mark. I did this after the yeast formed a krausen, for my own personal reasons. No hydro sample taken at that time, but using calculators, it should be about 1.057 (room temp) after the honey addition. It was 1.042 at 108 degrees the day before.
This will probably slow down by the weekend, and I can add the dry hop addition, and hopefully bottle in two weeks. If this is half as good as hopslam, I'm going to order all of these ingredients in bulk and start brewing full time, from my van down by the river.
Also, I don't have the fancy spreadsheet stuff, so I have to type the recipe out.
10 pounds pilsen malt
1 pound 20L crystal (I wanted 10l, but LHBS didn't have it)
2 pounds clover honey, generic (see note)
WL East Coast Ale
3.5 gallons 170F strike, mash started at 158 and slowly fell to 150 over the course of an hour.
2 gallons 200F batch #1 sparge
2 gallons 170F batch #2 sparge
6.5 gallons pre-boil at 1.024 @ 141F (adjusted to... 1.04something)
(all pellets)
1 oz cascade (7.2 AA) 60 min
1/2 cascade (7.2 AA) 15 min
1/2 amarillo (7.4 AA) 15 min
1 teaspoon irish moss 15 min
Dry Hop:
2 oz Simcoe (12 AA)
1/2 oz Amarillo (7.4 AA)
1/2 oz Cascade (7.2 AA)
Notes:
It took about an hour to chill to 100F, first time AG kinks getting worked out. The post-boil volume was 5.25 g in the fermentor. Next morning, the fermenter had cooled to room temp and yeast was pitched. After krausen formed, I topped off with 2 pounds of the honey mixed into 2 cups of boiled water which took me up to the 5.5 gallon mark. I did this after the yeast formed a krausen, for my own personal reasons. No hydro sample taken at that time, but using calculators, it should be about 1.057 (room temp) after the honey addition. It was 1.042 at 108 degrees the day before.
This will probably slow down by the weekend, and I can add the dry hop addition, and hopefully bottle in two weeks. If this is half as good as hopslam, I'm going to order all of these ingredients in bulk and start brewing full time, from my van down by the river.
