Accuflex Ultra 235 vs Kegland EVA barrier

[duncan.brown]

And yes, there's no JG 5/16" OD to 3/8" BSPP flat, which is the magic part you need.

 

[day_trippr]

I'll wait to see what the "magic" part I found looks like...

Cheers!

 

[duncan.brown]

It should look like the image below. These are the metric (black) acetal copolymer fittings that are functionally equivalent to the inch (grey) ones that I use. Both have nitrile o-rings.

5/16" is the magic imperial size that almost exactly matches a metric size (5/16 in = 0.3125in = 7.9375mm = 8mm if you give it a shove)

 

[day_trippr]

lmao! Yes, indeed, it should look like that - which I posted back here
https://www.homebrewtalk.com/thread...egland-eva-barrier.668944/page-7#post-9138712
But, the question is, is it flat, or conical?

 

[LBussy]

I'll let you know as soon as the package gets here.

 

[LBussy]

Cross-Posting this from the Keg Cop thread:

I hereby declare that the John Guest PM450813E fitting to be The Correct Fitting™ for Swiss Flow to 8mm EVABarrier tubing.

There is still a "cone" (maybe better called an internal collar to locate the washer) and I just don't care enough to figure out why this is better than the DMfit one. "It just is."