8 tap tower and Leland tap a draft for sale

[gunmetal]

8 Tap Tower is sold.

Next up is the Leland tap a draft. It has the great little Leland regulator mouted on a U.S. Sankey coupler with chrome faucet and black tap handle. It comes with two of the disposable cylinders. This is brand new in the box and sells for around $200 new. I am selling it for $100 plus around $14 shipping. Paypal only, or pick up in Columbus, Ohio. I have another of these that I used over the summer and one of the small cylinders dispensed a whole 7.5 gal keg. You can also disconnect it from the keg, dial down the regulator and the cylinder does not loose gas.

 

[Smashing]

Damn, that tower is a good price...

 

[mh-brews]

On the 8 tap, whats the distance between column flanges (where the bolts go) is in air or glycol ?

 

[gunmetal]

It originally had a glycol line going up through it that was nothing more than a copper tube bent back and forth. I was going to use fans to cool it up through the towers.. I will post back tomorrow with the dimensions, the tower is currently at my work.

 

[mh-brews]

Ok i am intrested if it is the spacing is same as my 2 column kegarator

 

[gunmetal]

I will post back in the morning with dimensions since I have to work tomorrow. I have a two column beveridge air kegorator myself. The spacing on these columns are just slightly wider than the two columns on mine. I was just going to move the columns out at the bottom of the tower because the columns bolt onto the bottom of the tower. Would have to put in a new sheet of stainless or something to keep the enlarged holes from showing under the tower.

 

[runningweird]

that is a fantastic price for that tower, if i didn't have a 6 tap I would buy it....

 

[gunmetal]

Yea, this is not a cheap chinese tower, I believe this one is an old school Micromatic model. Big bucks if purchased new.

 

[zazbnf]

pm sent

 

[gunmetal]

The inside dimensions of the towers are 11" flange to flange, 16" on center, and about 20" flange to flange outside dimensions. Also the estimated shipping is closer to $30, damn ups.

 

[zazbnf]

If tower is still available I'll take it.

 

[gunmetal]

Price on the Leland Tap a draft dropped to $100 plus shipping.