3 tap tower with long tap handles

[Kerednai]

Is there an easy solution for this. I have a 3 tap beer tower & I would like to use decorative tap handles such as those in the picture, but unfortunately they hit each other.
I could angle the ones on the outside, but I think that would look weird. One solution I can think of is to extend either the outside 2 taps or the center one so they aren't as close together. Obviously I could also just use a plastic tap on the center tap and decorative ones on the outside, but where's the fun in that. Just wondering if anyone has solved this problem already without changing the tower itself.

 

[Broken Crow]

Maybe just replace the middle tower-shank with a longer standard shank like this:
https://www.brewhardware.com/product_p/shank318ss.htmand add an appropriate tailpiece and spacer such as this;
https://www.ontariobeerkegs.com/shank-spacer-1inch.html...I know Micromatic, and I think Perlick as well make those spacers..(my link for the spacer is Canadian)

 

[day_trippr]

If you put one of these on your middle faucet you'd likely obtain the clearance to the outside neighbors that you need...

Cheers!