Malticulous

I know very little about AIOs. Both length and gauge are a functions of voltage drop. 12 awg is under 1.6 ohms per 1000 ft. 14 awg is...

Yup for sure. I currently use an all rounder. I'm thinking of adding 2 more.

Twist locks are nice but the regular NEMA 6-20 is fine. NEMA 6-15 is compatible with it too. Good for 4000 watts.

Hi Everybody, I know I haven’t responded to the thread in a while and for that I apologize. I do have some unfortunate news, after...

Added my Irish Red to the secondary to free up my SSBrewtec for today's brew ..secondary is tem controled via heat pad and SS brewtech...

I made my eHERMS system a little bit safer today by adding wet-location switches for the water and wort pumps. Before:

after nipping at the keg all day and going through my homebrew junk i got the weird idea of mounting a tap inside my kegerator? i dont...

For years I’ve brewed on our gas stove in the kitchen. Picked up this Camp Chef stove so I can brew in the garage. This is its inaugural...

Regarding preheating... If using a good calculation (one that considers the thermal mass of the tun), there's no need for a preheat step.

I use Brewers Friend calculator. With it if you preheat it will over shoot. It's been accurate for me. I used to use a different...

My coleman xtreme 70qt might loose one degree if it's full. That's with 30 lbs of grain and 13 gallons strike. It's really to big for a...

I'm drinking a dry stout bittered with cluster and finished with a touch a willamette. WLP001 dry. 18 days from brew and it's...

I'd say warrior has a little more ferm bitterness than magnum. I tend to use magnum in lagers and warrior in ales. It is nothing like...

I don't BIAB. Sure, with my 15 gallon kettle and a 12.5 gallon boil with propane I had to watch out for boil overs. But now using a 20...

Competition brew marathon starts tomorrow .. first up VonLola Bourbon Barreled Imperial Porter