aaronmlong
Member
Hi Everyone,
Unfortunately I need to downsize so I am selling my 1bbl system. It was entirely custom made over the years so specifications are a bit hard to come by. Please message me if you have any questions or want additional information.
details are as follows
3 vessel single tier stand made entirely out of SS
3x concord 160qt vessels. All are equipped with SS compression valves, thermowells, and sight glasses. The BK has a whirpool. Most of the fittings were from stainless brewing.
Mash tun has a custom built SS false bottom made by adventures in homebrewing.
1x march pump with a SS head.
The stand is equipped with 3 32 jet tip burners which may be more accurately described as flamethrowers. They are *hot*. As such I have a few heat shields for the components closest. Burners/systems are plumbed for propane.
The stand itself has solenoid valves inline on the propane feed for the 2x of the burners.
There is a control panel that is 80% built and I have all the components. I never got around to finishing it.
1x Spiedel 1bbl fermenter that has never been used.
There is probably 6000 worth of equipment all said and done. I am looking for 3500. You can email me at [email protected] if you want to discuss.
Unfortunately I need to downsize so I am selling my 1bbl system. It was entirely custom made over the years so specifications are a bit hard to come by. Please message me if you have any questions or want additional information.
details are as follows
3 vessel single tier stand made entirely out of SS
3x concord 160qt vessels. All are equipped with SS compression valves, thermowells, and sight glasses. The BK has a whirpool. Most of the fittings were from stainless brewing.
Mash tun has a custom built SS false bottom made by adventures in homebrewing.
1x march pump with a SS head.
The stand is equipped with 3 32 jet tip burners which may be more accurately described as flamethrowers. They are *hot*. As such I have a few heat shields for the components closest. Burners/systems are plumbed for propane.
The stand itself has solenoid valves inline on the propane feed for the 2x of the burners.
There is a control panel that is 80% built and I have all the components. I never got around to finishing it.
1x Spiedel 1bbl fermenter that has never been used.
There is probably 6000 worth of equipment all said and done. I am looking for 3500. You can email me at [email protected] if you want to discuss.
![20170805_115421.jpg 20170805_115421.jpg](https://cdn.homebrewtalk.com/data/attach/351/351710-20170805-115421.jpg)
![20170805_115425.jpg 20170805_115425.jpg](https://cdn.homebrewtalk.com/data/attach/351/351711-20170805-115425.jpg)
![20170805_115441.jpg 20170805_115441.jpg](https://cdn.homebrewtalk.com/data/attach/351/351712-20170805-115441.jpg)
![20170805_115455.jpg 20170805_115455.jpg](https://cdn.homebrewtalk.com/data/attach/351/351713-20170805-115455.jpg)
![20170805_115501.jpg 20170805_115501.jpg](https://cdn.homebrewtalk.com/data/attach/351/351714-20170805-115501.jpg)