Hi Everyone,
We hope the week is going great!
All of our products at Fastbrewing & Winemaking come from suggestions from homebrewers and winemakers. We love getting feedback on how to improve our current products and also what we should make next. Please keep emailing us with your questions and ideas - We are always all ears.
Without further delay below is our newest product we are designing and we want your feedback!
14 US Gallon - 53 Litre FastFerment
1.5” Teflon Seated Union Valve
--Current FastFerment uses the same style valve except 1”
14G total internal capacity including the Collection Ball
37 - 44 ounce Collection Ball
--Let us know your preferred size
304 Stainless Steel Thermowell
304 Stainless Steel insert for Thermowell to screw into
--This one is a maybe as it has been tricky to figure out
Slightly thicker walls (.137”/3.5mm) to give more rigidity and robust feel
No wall mounts - Very sturdy stand included in base model
--This FastFerment will sit much deeper in the stand and be very stable
Exterior Volume markings on the Conical Body
Exterior Volume Markings on the Collection Ball
6” Screw top lid with our newest hollow silicon gasket
--This the same lid we use on our current FF. This lid will have little dimples that add grip and there will be no sealing issues!
Estimated footprint in the stand will be 18” by 18” by 39”
Works with the current Thermometer and Spigot W/Drill Bit Accessories
Potential Future Accessories
Mason jar adaptor
Taller stand for fitting kegs underneath
Adaptor to make 7.9G FF Collection Ball fit to this unit
Insulated Jacket/Some type of cooling device
The Best Part?
We are doing a pre-sale for 1000 of the Base Models at a discounted price!
Presale Price - $159.99 USD plus $30 USD Shipping
Target MSRP after Presale = $190 - $205 USD Plus Shipping
(We haven’t confirmed this but this is range we are aiming for)
The Presale will start later in February with a ~2 month delivery time.
If you want to keep in the loop add your email address on our site www.fastbrewing.com
(Feel free to cross post this in another thread if anyone thinks it fits better there)
We hope the week is going great!
All of our products at Fastbrewing & Winemaking come from suggestions from homebrewers and winemakers. We love getting feedback on how to improve our current products and also what we should make next. Please keep emailing us with your questions and ideas - We are always all ears.
Without further delay below is our newest product we are designing and we want your feedback!
14 US Gallon - 53 Litre FastFerment
1.5” Teflon Seated Union Valve
--Current FastFerment uses the same style valve except 1”
14G total internal capacity including the Collection Ball
37 - 44 ounce Collection Ball
--Let us know your preferred size
304 Stainless Steel Thermowell
304 Stainless Steel insert for Thermowell to screw into
--This one is a maybe as it has been tricky to figure out
Slightly thicker walls (.137”/3.5mm) to give more rigidity and robust feel
No wall mounts - Very sturdy stand included in base model
--This FastFerment will sit much deeper in the stand and be very stable
Exterior Volume markings on the Conical Body
Exterior Volume Markings on the Collection Ball
6” Screw top lid with our newest hollow silicon gasket
--This the same lid we use on our current FF. This lid will have little dimples that add grip and there will be no sealing issues!
Estimated footprint in the stand will be 18” by 18” by 39”
Works with the current Thermometer and Spigot W/Drill Bit Accessories
Potential Future Accessories
Mason jar adaptor
Taller stand for fitting kegs underneath
Adaptor to make 7.9G FF Collection Ball fit to this unit
Insulated Jacket/Some type of cooling device
The Best Part?
We are doing a pre-sale for 1000 of the Base Models at a discounted price!
Presale Price - $159.99 USD plus $30 USD Shipping
Target MSRP after Presale = $190 - $205 USD Plus Shipping
(We haven’t confirmed this but this is range we are aiming for)
The Presale will start later in February with a ~2 month delivery time.
If you want to keep in the loop add your email address on our site www.fastbrewing.com
(Feel free to cross post this in another thread if anyone thinks it fits better there)