Hi, im new to the forum. This is how I set up mine. Costed $35 for the pad. $21 for an nsf rated valve for potable water and misc stuff I had laying around. I decided to use a 12v valve. Did not want 120v floating around inside the kegerator. There was a bit of foam but thats because I overcarbed the beer accidently The next keg poured fine.
[ame]https://www.youtube.com/watch?v=ZwtVxTJxwRI[/ame]
if I ever decide to do multi tap by building a keezer. It would only cost me for additional valves.
I forgot to add I programmed the pad to hold the valve open for 30 seconds. It has 99 user codes and a master code. The master can lock out all other codes. I dont need the 99 users. I just program one for guests and then delete it when done.
[ame]https://www.youtube.com/watch?v=ZwtVxTJxwRI[/ame]
if I ever decide to do multi tap by building a keezer. It would only cost me for additional valves.
I forgot to add I programmed the pad to hold the valve open for 30 seconds. It has 99 user codes and a master code. The master can lock out all other codes. I dont need the 99 users. I just program one for guests and then delete it when done.
Last edited by a moderator: