Search results

SSBrew - 728
Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. C

    BM-23 Stock Tower Cooler Questions

    You should feel air moving when the door is open and when it's closed. Where are you attaching the other end? Is the evaporator fan running continuously?
  2. C

    BM-23 Stock Tower Cooler Questions

    Mine has a wire with a bend also. I hook it over the 90 degree elbow.
  3. C

    Kegging CO2 Tank Sizes

    20 lbs for me, one came almost full with my kegerator and I bought another one nearly full at a garage sale for $8. I'm in good shape for a long time.
  4. C

    Pin keg rebuild help

    If you're not sure how to clean or inspect your kegs search YouTube for cleaning and rebuilding corny (or cornelius) kegs. You should be able to easily glean those steps necessary for your kegs. If you'd like you can order new seal kits for a few dollars from most any home brew store. Congrats...
  5. C

    Keg Leak Help?

    If you beverage line is leaking you'll have liquid pooling somewhere. Be sure to spray all connections including those on the tank. I also unplug my kegerator and listen for leaks if I'm suspect. Just be diligent and you'll find it.
  6. C

    First kegging!

    Great choices on your brews.
  7. C

    Corny's vs sanke's battle, who will win?

    Cleaning?
  8. C

    Co2 tank empty

    I had the same thing happen with a 20 lb bottle. I'm now in the habit of using a spray bottle with soapy water to check for leaks when I put in a new keg.
  9. C

    Identical beers taste different kegged vs bottled.

    The difference seems like the CBC1. Maybe that yeast didn't pair well with the original yeast? Also, I thought you only need to add yeast for bottling lagers that have been in the cold for an extended period?
  10. C

    A little leftover.....

    I think you can just use table sugar, 2 to 2.5 grams per bottle will get you close. I suggested to use a priming sugar calculator yesterday but there was some debate. The end result of the discussion with input from folks who know a lot more than I was .75 - 1 oz per gallon.
  11. C

    Renting a tap system

    Amazon has a cheap kit you might consider. You could either bring your CO2 tank or get one of the small chargers Dispense Kit http://www.amazon.com/Ball-Dispense-Liquid-Tubing-Faucet/dp/B000FNLGDM/ref=pd_sim_k_2/181-9513606-6493632?ie=UTF8&refRID=1X78MA5H8HGEG4SQ2WQ8 Charger...
  12. C

    how many taps do you have and how many do you want?

    I have a three tap tower on a Bev Air kegerator which holds four kegs. This provides ample variety for me and the ability to cold crash the fourth keg while I finish one of the other three. I don't see needing more.
  13. C

    Need Help Bev Air BM23 Remove Condenser Fan/Motor

    The compressor/motor and condenser are in a tray that is held on to the cabinet with four bolts. I removed them, dropped the tray and pulled it out from the left side. Success, new motor installed and running. Thank you!
  14. C

    Need Help Bev Air BM23 Remove Condenser Fan/Motor

    Thanks, I'll take a look.
  15. C

    Need Help Bev Air BM23 Remove Condenser Fan/Motor

    The motor is not running on my unit. The compressor runs for a while without the fan but shuts down. It's start to cool down during this time. The fan and motor are in a very tight spot and I'm unsure how to remove it. Does anyone have any experience with this? Thanks,
Back
Top