Search results

Sorry. I thought the description had the price. I just updated it but I am asking $1450

I'm not sure as I dont have keggle dimensions but the top of the stand is 16" x 52". The kettles I have slightly overhand the edge on either side but only because of the handles. When I was building, I didn't consider the handles being a part of the kettle dimension. Either way, this did not...

I'm in the process of converting over to a HERMS system and have no need for my single tier all grain system. This build is based on the "Brutus 10" plans so if you have those the frame will be to spec. Welded with 2"x 2" square tubing. Asking $1450 ***Please note, not all items in pictures...

Thanks tneary. I'll try this out as well.

I didn't even realize there was an Android version. I'll give that a shot. Thanks!

Hi, I am in the process of building a recipe and found one for a two hearted clone I want to copy. The first two base grains are the following: 10 lb (4.5 kg) | Briess Two-row Brewers Malt (1.8°L) 2.83 lb (1.3 kg) | Briess Pale Malt (3.5°L) The problem is that beersmith2 ONLY has "Pale Malt...

I am looking to by a beverage cooler that will go under a counter top w/ glass front to keep canned beer, etc. I want to keep it are $400 or less and need it to cool down to 36 degrees or so. A lot of beverage coolers out there won't cool down to that temp, from what i read. Does anyone have any...

I'm looking for a seal/cap for a standard beer bottle mouth(not twist off type) that will prevent any C02 from escaping. I want something that's sort of a slip on type cap rather than an actual crown cap. I am familiar with the plunger style where you pull the lever down and the sides of the...

I live in Raleigh, NC and want to take a stab at making cider rather than beer for a change. Where can I source real cider and if I can't easily, what is the best method to start for a newbie in the cider making world. Thanks!

Does anyone have specs for an equipment profile for the 15gal Spike Brewing V3 Kettle for BeerSmith? I'm having a hard time getting all of the values I need for my equipment profile. I have 15 gal V3 kettles for the HLF, Mash Tun, and Boil Kettle. Any help would be appreciated. Cheers!

Hi Everyone, I've been AG brewing for about 2 years but have never locked down my knowledge about water chemistry so for that reason i've never dabbled in adding salts/chalk/minerals to my beer. Right now, I ONLY use an inline charcoal filter but that's it for my water treatment. Raleigh...

Doug, I actually just figured this out and yeah you were on the right track. I've been going at it for a couple hours. I switched the block to the other side several times with no luck but it ended up being that I could rotate the knob 90 degrees and that pretty much switched the switch. Thanks...

I'm working on my control panel for a Brutus 10 build and having a major headache with a basic switch from electric brewing supply. http://www.ebrewsupply.com/2-way-1-no-contact-switch/. No matter what way I wire it, the polarity is reversed and i've tried about 20 combinations. In my mind...

Thanks for the replies everyone. That makes me feel better. If I didn't spend so much money on these kettles I wouldn't be so concerned with it. And yeah I dry fired a 10 gallon SS kettle on these same burners when I was just testing for propane leaks not thinking and it did warp the bottom of...

This might be a really dumb question and i'm starting to think it is based on the lack of information when googling but I just purchased 3 badass 15 gallon SS kettles and they are beautiful. I also am working on my single tier system with 12 or 15 tip jet burners. There are no guides on how...

Thanks for the reply. Yeah I mean I would think so too but the more I google and search forums, I see guys talking about how you need a 220,000 BTU burner to properly heat 10 gallon batches in a normal amount of time, etc, etc, etc.

I just finished building my brewstand based on the Brutus 10 and now looking to buy burners to start on the next phase of the build. If I am going by the Brutus plans, the burners that are most similar are from morebeer here. I also see a cheaper version here but not really sure of the quality...

I just finished building my brewstand based on the Brutus 10 and now looking to buy burners to start on the next phase of the build. If I am going by the Brutus plans, the burners that are most similar are from morebeer here. I also see a cheaper version here but not really sure of the quality...

I'm making a chocolate stout this weekend and I have about 12 and a half pounds of grain going into it. 1 pound of the bill is flaked oats. I'm also thinking about adding a half pound of lactose to the boil . I just want to make sure that my stout has a good thick body. Do you think the flaked...

Thanks. That helps.