Search results

I have also seen guys build a wooden shelf with a hole cut it it that they put in a full size fridge

Made a custom chamber

What is the ceiling for WP hopping rates? Are you suggesting more like 0.75 oz of hop per gallon of wort in the WP?

it is 8 gal in my FV never calc'd the ibu's

I have foam insulation wrapped around all my hoses already. I will have to check what the temp is coming out from the pump onto the top of the wart next brew.

I typically use 11 oz of hops in my whirlpool and have done some testing. Using the same DH schedule to see what WP times & temps are better and for me, here is what worked best so far based on two different variations of time & temp using the same amount of hops. WP addition #1: 3 oz @ 170*F...

Check this video i came across of a neat looking hop doser. Does anyone see any design flaws\issues with it? I am thinking about building one. Also trying to figure out a parts list to make this thing.

I am trying to tweek this process also. My temp prob is 3 inches away from my 5500w element being controlled by the DSPR 320. So when the element fires the prob reads real high, i did not consider this before i drilled the hole in the kettle. I just read that you want the prob to be between the...

I like your steps nicely thought out. One question why do you change the MOut to a low percentage and what percentage do you use?

It may form a hop cone one the bottom of your kettle if your pump is strong. I have the same setup And I just manually churn up the wort against the flow and side to side to make sure the hops are all suspended in the sweet wort. Not sure if it matters much but my thinking is more surface area...

Just did a test run and it’s working good. Only one thing I need to fix. When I plugged my 15amp 1650w auxiliary element into one of the pump receptacles it fired for like 2 min the it cut off. Now both auxiliary switches are dead. I check one fuse but it was still good. I am guessing it was too...

Hell yeas we now have a light that is on. I am pumped!!

Holy smokes you guys rock. I am going to swap them around in 15min and report back. Thank you some much for the help I hope this fixes !!

The ssr is brand new but the light is not turning on. I do have 12vdc coming off the ezboil side Ok I got 125v @ ssr ac in to the receptacle ground and 75v @ ssr ac out to ground.

sorry I am dumb. Which port is the “in” on the ssr. Is it the number 2

I just noticed the led light on my ssr is off. Is that something to be concerned about?

If I could take anymore pics that may help let me know.

I get 125v when the element is plugged in to the controller

Getting 75v here on the back side of the receptacle without element plugged in

Getting 200v here