Inspired from some other examples I've decided to upgrade my brew setup to include a brew ladder. It's in the early phases of construction. Please post your comments, ideas, suggestions, questions!
Some of the bigger problems I have not yet solved or picked a solution for:
Initial placement of the chill plate and pump:
Here shows ladder steps 3 and 4 removed so that I can test fit the new mash shelf:
Here is the mash shelf frame assembled and in the down position:
Here is the mash shelf frame assembled and in the up position:
Mash shelf is actually done now:
Mash shelf supporting mash tun filled with spent grain:
Some of the bigger problems I have not yet solved or picked a solution for:
- Electrical (placement of switches/outlets, running of wire)
- Water supply (chill plate & BK)
- RIMS/HERMS
Initial placement of the chill plate and pump:
![10907571405_ff7628ea85_c.jpg](https://proxy.imagearchive.com/18e/18e2ea6ee57e6fb6af97175a2c8f1476.jpg)
Here shows ladder steps 3 and 4 removed so that I can test fit the new mash shelf:
![10907583355_4b9d52d651_c.jpg](https://proxy.imagearchive.com/3eb/3eba119aa260407cce615b1fb09ca043.jpg)
Here is the mash shelf frame assembled and in the down position:
![10907598155_b509777a8b_c.jpg](https://proxy.imagearchive.com/763/7634eacff87a02ef42d636d921c3e386.jpg)
Here is the mash shelf frame assembled and in the up position:
![10907609325_b805e1ea2f_c.jpg](https://proxy.imagearchive.com/0a5/0a5a0085bd55ae553b56dff5069c3168.jpg)
Mash shelf is actually done now:
![10909263236_6aa7f998cb_c.jpg](https://proxy.imagearchive.com/b27/b27e01f4f2d805f32f8bd91368d4b9d7.jpg)
Mash shelf supporting mash tun filled with spent grain:
![10909348755_1d82a191a9_c.jpg](https://proxy.imagearchive.com/9bb/9bbba4d1c852c0f5974fed9a3121b5e3.jpg)