Anyone try out the new Perlick 650SS Stainless Flow Control?

thefost · Jan 15, 2015

Sixgun2764 said:
Hey Guys,

Thanks for the feedback. I appreciate it greatly!

Cheers

Sixgun

Got your PM, thought I'd post here.

Yes, they are 3" center to center, as you can see in the picture below. I have the handles fanned out slightly so they don't come into contact. Most of the handles are off right now because I'm doing an experiment.

Kjuckett1025 · Jan 15, 2015

Anyone here running the 650's with ultra barrier silver liquid line? If so, what length are you using? Wondering if I could run shorter lines since they have the flow control.

Was going to do 12ft lines but wouldnt mind cutting that in half

Sixgun2764 · Jan 17, 2015

Hey thefost,

Thanks for the follow up post. I really appreciate the extra effort!

Cheers

Sixgun

bcrawfo2 · Feb 28, 2015

A late post. I just cut my beer lines to 4 foot (bevflex 200) and can serve seltzer at 30psi with no issue

Culinarytracker · Mar 12, 2015

bcrawfo2 said:
A late post. I just cut my beer lines to 4 foot (bevflex 200) and can serve seltzer at 30psi with no issue

Awesome. I just got 4 650ss's today. As soon as the varnish dries I will be installing them in my keezer.

How is the flow? If I keep my lines around 8-10 foot, will it work better serving beer with the control more open, or would it be the same with 4 feet, and the flow control shut down a bit??

Edit: I am also using bevflex 200

bcrawfo2 · Mar 12, 2015

Culinarytracker said:
Awesome. I just got 4 650ss's today. As soon as the varnish dries I will be installing them in my keezer.

How is the flow? If I keep my lines around 8-10 foot, will it work better serving beer with the control more open, or would it be the same with 4 feet, and the flow control shut down a bit??

Edit: I am also using bevflex 200

I got them 650s because was trying to clean up the inside of my keezer So far I am very happy with 4 ft and have plenty of adjustability

-CHRIS- · May 17, 2015

Kjuckett1025 said:
Wondering if I could run shorter lines since they have the flow control.
f

You sure can, my lines are 3 feet now. Although I called Perlick and asked tech support and they said it wouldn't, the flow control certainly allows you to use short beer lines at high pressure. The only tradeoff is flow rate. I can fill 3 ounce sampler glasses of highly carbonated wheat beers no problem.

Chris

gnef · May 18, 2015

I currently have three 650ss faucets, one on the walk in (out of 14 taps, the others are original ventmatics, 425ss, and 525ss faucets), and two for direct keg drawing for samples or even serving if I want.

I plan on switching out all my faucets eventually for the 650ss, I like them that much. I also plan on going to the bev seal ultra tubing afterwards as well, but I will be getting the 1/4 x 3/8 tubing since I have moved to 3/8'' john guest fittings for everything, and plan on putting the fittings on the shanks once I change out to all 650ss faucets so that I don't have to worry about the difference in pressure drop due to the line.

Anyone try out the new Perlick 650SS Stainless Flow Control?

Help Support Homebrew Talk:

thefost

Well-Known Member

Kjuckett1025

Active Member

Sixgun2764

Supporting Member

bcrawfo2

Well-Known Member

Culinarytracker

Supporting Member

bcrawfo2

Well-Known Member

-CHRIS-

Well-Known Member

gnef

Well-Known Member

Similar threads

Latest posts