• Please visit and share your knowledge at our sister communities:
  • If you have not, please join our official Homebrewing Facebook Group!

    Homebrewing Facebook Group

Single tier banjo burner setup

Homebrew Talk

Help Support Homebrew Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
OneManBrewery, or any one else on here, know what the fireplace kit looked like? I've been to both Lowes and HD and neither had someone that was able to help me piece my system together. I have 3 banjo burner with their own regulators, and just need to know how I should hook them all up to one tank.
 
It's made by Dormont, I found it at Lowes in the gas fireplace area. Brasscraft makes a similar one but it's more pricey. It comes with connectors that I needed to go from needle valve to black metal flex tubing and other end connects right to orifice. It's comes with some pipe sealant. Its never leaked, made plumbing easier and looks great. All you need is a gas needle valve. Hope this helps.

20131211_095046.jpg
 
Last edited by a moderator:
Am I missing something? I've been researching how to plumb my single tier build for a while now. I am using BG14 burners with the 0-30 psi high pressure regulator. All of the flexible gas pipe some of you are using in this thread are rated for extremely low pressures. Some of them are rated at a max of .5 psi. I assume because they are made for low natural gas pressure. I'm not that intelligent, but my brain is telling me if I added this flexible gas hose and at even 10 psi (which is low for these burners) I would be exceeding the max .5 psi of the hose by 20x. Kind of scary. Should I not be concerned about this? I don't need any flame throwers in my garage.
 

Latest posts

Back
Top