Golddiggie
Well-Known Member
My new mash tun has arrived, so it's time to sell my old one. I made it about 10 years ago and has seen more than a few batches. But it's stainless steel, so no F's were ever given.
Comes with the 15" JayBird false bottom (NorCal Brewing Solutions) plus heavy duty false bottom stand. False bottom has a handle and hinge installed (came that way when I bought it direct).
Dip tube and ball (3 piece) valve already installed/configured as well.
I have the keggle MT fitted with a type-K sensor/thermocouple, but can swap it out for either a plug (no charge) or a dial thermometer if you want (additional charge).
I applied insulation to the side of the mash tun since we've been brewing outside through the year. Including winter months, so it needed a little help.
Also has a fitting near the top for recirculating into the mash. That has another three piece ball valve along with fittings inside, plus a short tube, to direct the liquid flow.
One of the cut tops from another of my keggles will be included as a 'lid'. You'll want something to plug the opening with.
I have a bag full of the cam-lock fittings available. Those are not included in the keggle cost. No QD fittings are going to be included with the keggle MT. If you're interested in these fittings, message me.
I have additional 3 piece ball valves that are also available (all of the valves are stainless). $20 each.
Location: Pelham, NH
Terms: F2F, cash
Price: $250 (for the mash tun without QD's)
PM here if interested.
Pictures:
Comes with the 15" JayBird false bottom (NorCal Brewing Solutions) plus heavy duty false bottom stand. False bottom has a handle and hinge installed (came that way when I bought it direct).
Dip tube and ball (3 piece) valve already installed/configured as well.
I have the keggle MT fitted with a type-K sensor/thermocouple, but can swap it out for either a plug (no charge) or a dial thermometer if you want (additional charge).
I applied insulation to the side of the mash tun since we've been brewing outside through the year. Including winter months, so it needed a little help.
Also has a fitting near the top for recirculating into the mash. That has another three piece ball valve along with fittings inside, plus a short tube, to direct the liquid flow.
One of the cut tops from another of my keggles will be included as a 'lid'. You'll want something to plug the opening with.
I have a bag full of the cam-lock fittings available. Those are not included in the keggle cost. No QD fittings are going to be included with the keggle MT. If you're interested in these fittings, message me.
I have additional 3 piece ball valves that are also available (all of the valves are stainless). $20 each.
Location: Pelham, NH
Terms: F2F, cash
Price: $250 (for the mash tun without QD's)
PM here if interested.
Pictures: