I fixed the issue and now it will prompt for admin user name and password like it should so no more empty username/passwordsproper script uploaded
I fixed the issue and now it will prompt for admin user name and password like it should so no more empty username/passwordsproper script uploaded
YOU SIR, ARE A BOSS!Yep, I looked at the code and found that that config wasn't being used anywhere. I added the logic for it and just committed the change for files beerListTable.php and beerListTableVerticle.php
Its probably easier to just do a manual update, change line
<h2><?php echo $beer['srm']; ?> SRM</h2>
to
<?php if($config[ConfigNames::ShowSrmValue]){?>
<h2><?php echo $beer['srm']; ?> SRM</h2>
<?php }?>
I can not seem to get this installed/setup using the build your own option. is there and updated installation guide as im thinking a lot has changed with raspberry os since the guide was made?
Taps - expand settings - check "use plaato".AWESOME thank you so much. that worked like a dream. now how do i link my plaato kegs? is it under load cells? what do i enter and where?
it will not populate on the admin/taps screen, it will only populate on the main list screen.still not working
it will not populate on the admin/taps screen, it will only populate on the main list screen.
If you want to see what values are coming back from plaato, remove // in front of line 77 of /var/www/html/index.php (assuming you installed to /var/www/html) then refresh the main rpints page. it should list the the Plaato URL, the Plaato Value, and the Value RPints is using in the upper left corner.
plaato kegs working for me. I had to email them for the auth code. Then you have to go through config and enable appropriate settings to display keg levels.
Try copying settings in these images. I only have the plaato keg on 4 of my taps so far.I have RPints running fine, have just received my Auth codes for my PLAATO kegs. Could you talk me through how I configure and enable correct settings please.
if you modify the index.php lines ~166 and 282
setTimeout(function(){window.location.reload(1);}, 60000);
to
setTimeout(function(){window.location.reload(1);}, 10000);
Try copying settings in these images. I only have the plaato keg on 4 of my taps so far.
And then to get the last pour to update i modified a line in index.php so that the page reloads every 10 seconds:
[...] I'm at a loss.
I'll defer on the level of difficulty - as long as it's stipulated you're starting with code that runs on the current Raspbian releases.
If that fork goes back pre-Stretch it's going to need the same major massaging you did to the original 2.0.1 code...
Cheers!
fwiw, I found these three links to files for the click-to-pour thing:
index.php: https://pastebin.com/bGi9vY6w
style.css: https://pastebin.com/b2aa9dgu
"highlights" https://pastebin.com/qGqSAKTV
Cheers!
Found on this page:
https://www.reddit.com/r/Homebrewing/comments/448ujz/raspberry_pints_with_buttons/
Thread link takes us to the original post from January 2017, but then basically a dead end.
Other than looking "cool", why go through these mods? Simply weight (using the travel bag lift type weigher) the keg empty, weight full and can easily estimate amount left.
Perhaps with those files available to peruse @RandR+ might be persuaded to add the "click a pour" feature as a gui-driven option
Cheers!
Do you still have that all working? If so, you might consider posting your files where folks can get at them
Cheers!
Can't even believe anyone in this thread thinks weighing kegs makes any sense. That's gotta be a whole 'nuther thread
Cheers!
// Sets the amount to be a fraction of a gallon based on 165 ounces per pulse (21120)
$amount = $PULSE_COUNT / 21120;
In pours.php there is a k-factor in ticks per gallon. The default (for the SF800 meters) is 2110 ticks per gallon or 165 ticks per ounce.
Code:// Sets the amount to be a fraction of a gallon based on 165 ounces per pulse (21120) $amount = $PULSE_COUNT / 21120;
You'd have to do the fluid volume conversion to correlate your milliliter k-factor into ounces/gallons.
Cheers!
might be persuaded to add the "click a pour"
There is a hidden feature my branch picked up controlled by the "Allow Sample Pour from List" configuration. If that is on then clicking the tap number/image on the beer list page will do a "sample pour" of 1 oz for that tap.Wants to take it on, I’ll make all my work available to him.
day_trippr said:Hope you made an sd card clone...
I am very happy for you
It kills me that so many folks end up on the "Rebuild From Scratch" rocks because they neglected to clone their working SD cards.
I literally have an Altoid tin filled with clones for all my RPi systems because life is too short to build a whole new deployable base image and then customize it for each mission. And whenever I do a significant mod to any machine its card gets cloned after a few days of run-time validation.
Anyway...you could try wiping the card and cloning your current working image to it, then boot off it and see if it stays on its feet. Frankly, ime, that doesn't happen very often. Once they start acting whack there's usually no coming back to a truly reliable state...
Cheers!
[...]Is anyone running a CRON job to dump their SQL DB on a regular interval into a file?[...]
Enter your email address to join: