Used PHH-7011 PH Meter. Barely used. Purchased in Spring 2017. Comes with original manual and molded black plastic case. Throwing in 3 big bottles of buffers/storage solution. One 4.0, one 7.0 and one electrode storage solution. Electrode storage solution has no expiration, the others expire in November 2018 and January 2019, but still calibrate the meter perfectly. Likely to do so beyond expiration, but ymmv. Meter has been handled and stored with care. Calibrated it today to check the Calibration Slope and Electrode status and was very pleased to see that the Percentage of Slope ( used to indicate the status of the electrode) was at 100. Anything lower than 70 or higher than 130 means the electrode needs replacement. 100 is ideal ( per manual). Pic showing meter, solutions, and the Slope Percentage attached. Purchased new from Omega for $120 https://www.omega.com/pptst/PHH-7000.html. The solutions were another $20 on Amazon.
$85, shipping included. Thanks!
$85, shipping included. Thanks!
Attachments
Last edited: