In Waukesha area of Wisconsin.. Been brewing for many years but have decided now is the time to call it quits so everything is for sale. Will charge actual shipping if not able to pick up in person, prices below is without shipping.
Photos here: https://drive.google.com/drive/folders/11eE-EEypEgOcy_0_c8UFUimYMl-QZY5l?usp=sharing
- 2 Ball lock corny kegs, $30 each or $50 for both
- Stainless 2" RIMS tube and Toolbox PID Controller- Comes with a power on switch and another switch that turns the pump (I had mounted in the toolbox as you can see in the photo) and heater element on at the same time. When the time ends on the PID the light above it flashes and makes a sound to alert you. Please note i misplaced the thermocouple wire that goes from the RIMS tube to the controller so one will need to be purchased, it is a cheap item. Comes with stainless CAM locks on each end, thermocouple probe, heating element (used once), 2 high temp silicone tubing with stainless female cam locks. The PID is a SYL-2352. It also comes with two clamps as shown in the photo. I had this mounted to the front of my aluminum brew frame. $300 OBO
-10 Gallon used Whisky barrel - Brewed 1 batch of sour in it, it was amazing.. $100 OBO
-Chugger Stainless Inline pump with stainless male Camlocks on each end, stainless ball valve which is easy to disassemble and a copper air purge with ball valve. Will come with 42" high temp silicone hose with female stainless camlocks. $150 - SOLD to jalc6927
-15 Gallon Morebeer Stainless pot with sight gauge, it has copper sandwiched in the middle for better heat transfer. Comes with custom made bag to use as BIAB. Also included is a stainless ball valve, camlock, false bottom, lid (Has hole drilled and stainless cam lock) and Extruded 8020 Aluminum frame on wheels which has a propane burner underneath. $300 OBO
- 50 Ft copper immersion chiller with hose fittings and stainless cam lock $50 OBO
- Oxygenation Kit (The system comes with a valve to attach to an oxygen tank, tubing, and a 16" aeration wand tipped with a stainless steel 0.5 micron air stone.)- $40 OBO
2L Erlenmeyer flask and stir bar for wort starters $25 OBO
Also have things like stainless racking tube, wine thief, hydrometer, refractometer etc.. that i have not posted yet, if there is any interest I will throw some of these thing in if you purchase something.
Photos here: https://drive.google.com/drive/folders/11eE-EEypEgOcy_0_c8UFUimYMl-QZY5l?usp=sharing
- 2 Ball lock corny kegs, $30 each or $50 for both
- Stainless 2" RIMS tube and Toolbox PID Controller- Comes with a power on switch and another switch that turns the pump (I had mounted in the toolbox as you can see in the photo) and heater element on at the same time. When the time ends on the PID the light above it flashes and makes a sound to alert you. Please note i misplaced the thermocouple wire that goes from the RIMS tube to the controller so one will need to be purchased, it is a cheap item. Comes with stainless CAM locks on each end, thermocouple probe, heating element (used once), 2 high temp silicone tubing with stainless female cam locks. The PID is a SYL-2352. It also comes with two clamps as shown in the photo. I had this mounted to the front of my aluminum brew frame. $300 OBO
-10 Gallon used Whisky barrel - Brewed 1 batch of sour in it, it was amazing.. $100 OBO
-Chugger Stainless Inline pump with stainless male Camlocks on each end, stainless ball valve which is easy to disassemble and a copper air purge with ball valve. Will come with 42" high temp silicone hose with female stainless camlocks. $150 - SOLD to jalc6927
-15 Gallon Morebeer Stainless pot with sight gauge, it has copper sandwiched in the middle for better heat transfer. Comes with custom made bag to use as BIAB. Also included is a stainless ball valve, camlock, false bottom, lid (Has hole drilled and stainless cam lock) and Extruded 8020 Aluminum frame on wheels which has a propane burner underneath. $300 OBO
- 50 Ft copper immersion chiller with hose fittings and stainless cam lock $50 OBO
- Oxygenation Kit (The system comes with a valve to attach to an oxygen tank, tubing, and a 16" aeration wand tipped with a stainless steel 0.5 micron air stone.)- $40 OBO
2L Erlenmeyer flask and stir bar for wort starters $25 OBO
Also have things like stainless racking tube, wine thief, hydrometer, refractometer etc.. that i have not posted yet, if there is any interest I will throw some of these thing in if you purchase something.
Last edited:
