Purchased kegorator now need to convert Sanke to Corny Ball lock: need help

[bigwheell]

I recently purchased a dual tap Kegorator from www.Kegorator.com. Cut an pasted the address here: http://www.kegerator.com/kc2000twin...kegerator-and-keg-beer-cooler/KC2000TWIN.html

Included with the purchase was everything to hook up to Sanke Kegs. I want to be able to convert the set up to accept ball lock kegs. Can someone here give me an idea of what kit to buy and link it.

This is what I think I need, but I am not sure...

http://www.kegerator.com/tap-rite-ball-lock-easy-keg-conversion-kit/43-0110-00.html

Or this ?

http://www.amazon.com/dp/B00719WTUW/?tag=skimlinks_replacement-20


Any help would be appreciated.

 

[johngaltsmotor]

The first one from kegerator.com is what you need. The 2 parts at the bottom of the picture (has threads up and a disc at the bottom) are what you replace the standard fittings on your Sanke tap with. Then you put the female threaded adapters with hose barbs into your hoses. Then you can attach either the ball lock or Sanke fittings to your kegerator lines.

 

[hunter_le five]

Are you wanting to be able to switch back and forth between commercial and homebrew kegs, or are you just wanting to strictly use homebrew kegs in your kegerator?

The first kit is great if you want to switch back and forth between the two. If you just want to use ball-lock kegs, you can find a cheaper kit that requires less parts, more like the second kit.

 

[bigwheell]

I am looking to go with only homebrew only, no commercial kegs.

http://www.amazon.com/dp/B00719WTUW/?tag=skimlinks_replacement-20

Is this all I need if I am going to go with homebrew only?


Thanks...

 

[hunter_le five]

I am looking to go with only homebrew only, no commercial kegs.

http://www.amazon.com/dp/B00719WTUW/?tag=skimlinks_replacement-20

Is this all I need if I am going to go with homebrew only?


Thanks...

That should do it.