Qty 2 - Cavagna Dual-Stage propane regulator - 160,000btu, 3/8" FPT outlet and 1/4" FPT inlet. Used once - perfect working order. Asking $15 each.
0-15 PSI adjustable propane regulator - 750,000 btu's. 1/4" FPT inlet/outlet. Used a handful of times. Asking $15.
0-30PSI adjustable propane regulator with 1/4"ID rubber hose, and quick disconnect. Connect to a 3/8" gas flare fitting (AKA 45 degree SAE). Used a handful of times. Has the green acme fitting good to 200,000btu's. Asking $30.
Assortment of stainless gas connector hoses as follows:
Qty 3 - 24", 1/4" ID with 3/8 female flare on both ends. Asking $10 each. Rated for low pressure, but tested at higher pressures.
Qty 1 - 36", 1/4" ID with 3/8 female flare on both ends. Asking $10. Rated for low pressure, but tested at higher pressures.
Qty 2 - 16", 1/4" ID Stainless Steel braided hose with 3/8" carbon steel gas female flares ends. These are rated for pressures up to 2000PSI! These are custom hoses I had made. Cost me $38 per hose, asking $20 per hose. Never used. Good for high pressure and rated to 1500 degrees F. Bend radius is 5".
Qty 3 - 26", 1/4" ID Stainless Steel braided hose with 3/8" carbon steel gas female flares ends. These are rated for pressures up to 2000PSI! These are custom hoses I had made. Cost me $42 per hose, asking $25 per hose. Never used. Good for high pressure and rated to 1500 degrees F. Bend radius is 5".
Assortment of brass gas control valves.
Qty 3 1/4" FPT brass ball valves - good for basic shutoffs. Asking $15 for all three, or $6 each.
Qty 2 1/4" FPT inlet x 1/4" MPT outlet ball valves - asking $10 for both, or $6 each.
Qty 2 1/4" FPT x 1/4" MPT needle valves - for fine control of gas - asking $10 each or $15 for the pair.
PM me if interested. Thanks in advance!