wedge421
Well-Known Member
I have the dual regulator setup from MW Supplies. My question is Im trying to force card for 24 hours at 40psi and then another 24 hrs at 20 psi. My problem is that I cannot get the pressure regulator to go up to 40psi. I hooked up everything turn on the gas and shake and the regulator starts to rise. I turn the adjustment knob to increase the pressure but it gets to a point where it is tight and will not turn anymore to raise the pressure. Can someone give me a dummy guide to using a pressure regulator? Below is the regulator I have but it does not have the screws for the adjustment is has knobs.
http://www.midwestsupplies.com/products/ProdByID.aspx?ProdID=4884
http://www.midwestsupplies.com/products/ProdByID.aspx?ProdID=4884