HopHog87
Well-Known Member
- Joined
- Aug 29, 2013
- Messages
- 51
- Reaction score
- 3
Hey guys, I need your advice as to which burner to install on my current brew sculpture project.
I will be using keggles (I finally decided to bite the bullet and convert some new kegs) and they will be sitting on a 1 1/2" square tube steel frame. I am going with a single tier three vessle setup but only heating under the HLT and BK.
I am so confused, reading through the multitudinal threads on burners/orifices/regulators/manifolds. I don't even really know what all is required for a burner to be HP vs LP. I jus want to make sure that my burner can boil up to 12 gallons (not that I plan on doing 10 gallon batches for now) and that the regulator I purchase is compatible. But I want a simple, cost effective solution.
Coul you guys please tell me exactly which cost-effective burner will work with exactly which regulator and if I need a special adapter to connect the two through a manifold (I plan on running the hose from reg into black pipe manifold through a couple tees up to the burner). Thanks in advance.
I will be using keggles (I finally decided to bite the bullet and convert some new kegs) and they will be sitting on a 1 1/2" square tube steel frame. I am going with a single tier three vessle setup but only heating under the HLT and BK.
I am so confused, reading through the multitudinal threads on burners/orifices/regulators/manifolds. I don't even really know what all is required for a burner to be HP vs LP. I jus want to make sure that my burner can boil up to 12 gallons (not that I plan on doing 10 gallon batches for now) and that the regulator I purchase is compatible. But I want a simple, cost effective solution.
Coul you guys please tell me exactly which cost-effective burner will work with exactly which regulator and if I need a special adapter to connect the two through a manifold (I plan on running the hose from reg into black pipe manifold through a couple tees up to the burner). Thanks in advance.