rkhanso
Well-Known Member
- Joined
- Jan 24, 2017
- Messages
- 776
- Reaction score
- 175
Here's my CFC - a home-made Jaded Cyclone copy. I haven't actually used it yet, as my BIAB system is not quite complete. I still have to put the real fittings on the in/out of the hot and cold side of the chiller. The wort input and output will both have camlock fittings. The cold side fittings will be screw-on garden hose fittings.
I did solder a piece of electrical wire in a spiral fashion around the outside of the 1/2" pipe that was put inside the 3/4" pipe in hopes to get some turbulence and improved chilling.
The CFC is approx 6" wide and 27" long and has 4 layers.
I did solder a piece of electrical wire in a spiral fashion around the outside of the 1/2" pipe that was put inside the 3/4" pipe in hopes to get some turbulence and improved chilling.
The CFC is approx 6" wide and 27" long and has 4 layers.