EricS
Well-Known Member
Finally getting my equipment together for AG. I started working on my mash tun.
Picked up a 70 Qt Colemann Extreme cooler from Walmart.
![IMG_0089.JPG IMG_0089.JPG](https://cdn.homebrewtalk.com/data/attachments/4/4100-ac0642e1510e84cd9faea07745dabba2.jpg)
Copper and CPVC fittings and in the back my ghetto homemade mach paddle.
![IMG_0090.JPG IMG_0090.JPG](https://cdn.homebrewtalk.com/data/attachments/4/4101-650548349658b0eb897e7528f0061946.jpg)
Put together the ends for the wort extractor. Because of the T's I was not able to get the spacing I wanted on the side where it will connect to the bulkhead. Opposite side has correct spacing so the two inner tubes will be angled when inserted.
![IMG_0085.JPG IMG_0085.JPG](https://cdn.homebrewtalk.com/data/attachments/4/4098-ad4882ffbf557da01ce006b7168a6c7a.jpg)
![IMG_0087.JPG IMG_0087.JPG](https://cdn.homebrewtalk.com/data/attachments/4/4099-a2b4e2f117d8496e9b992810399fb19c.jpg)
More to follow.
Picked up a 70 Qt Colemann Extreme cooler from Walmart.
![IMG_0089.JPG IMG_0089.JPG](https://cdn.homebrewtalk.com/data/attachments/4/4100-ac0642e1510e84cd9faea07745dabba2.jpg)
Copper and CPVC fittings and in the back my ghetto homemade mach paddle.
![IMG_0090.JPG IMG_0090.JPG](https://cdn.homebrewtalk.com/data/attachments/4/4101-650548349658b0eb897e7528f0061946.jpg)
Put together the ends for the wort extractor. Because of the T's I was not able to get the spacing I wanted on the side where it will connect to the bulkhead. Opposite side has correct spacing so the two inner tubes will be angled when inserted.
![IMG_0085.JPG IMG_0085.JPG](https://cdn.homebrewtalk.com/data/attachments/4/4098-ad4882ffbf557da01ce006b7168a6c7a.jpg)
![IMG_0087.JPG IMG_0087.JPG](https://cdn.homebrewtalk.com/data/attachments/4/4099-a2b4e2f117d8496e9b992810399fb19c.jpg)
More to follow.