March pump

[jxm2119]

These pumps are new old stock, I have 5 of these with new wet end assembly.
These were OEM pumps used for a different application but are similar in
dimensions and spec's to MARCH MODELS:
MDXT (0135-0174-0100 d1)
MDX-3

$60 each includes s/h.

These are the specs as listed from march:
March model 957-001-01

Max Flow: 8.5 G.P.M (60Hz)
Max Head: 19 ft. (60Hz)
Max Flow: 30 L.P.M (50Hz)
Max Head: 4 m (50Hz)
Inlet: 1/2" OD
Outlet: 1/2" OD
HP: 1/25 (60Hz)
7LB 8OZ

Motor:
Universal Electric
SER 4UA 24787 MOD AB1SO73N"
1/15 HP
230V 50/60Hz
.99A/.82A 2500/3000 RPM
BALL BEARINGS U.L. #E22286
THERMALLY PROTECTED #130-049-10

Feel free to ask any questions.
jay.w.murphy AT Gmail.com

 

[ultravista]

Pictures do not display.

 

[RonRock]

Are these 230 volt? Specs stated say they are. Just want to verify.

 

[mattd2]

Does the $60 including S&H count if shipping to New Zealand
But seriously, would you consider it? Depending on the total cost I might be in for 1.
Cheers.

 

[bhamade]

Are these rated for brewing temperatures? Also, are they 120 or 230?

 

[SweetSounds]

Conditional dibs on 2
Want 220v and easy to source parts...
Email sent!

 

[fuzzybee]

Also conditional dibs on 1 if it is 110 and can handle the temps.

 

[SweetSounds]

Emailed OP:
Heads are replaced due to shipping damage, with March MDX-3-1/2 parts (Direct replacement)

They are 230v motors
Rated for 8GPM @ 2' head (809 is 6GPM @ 2') - These are stronger than an 809, but have barbs instead of threads.

Heads and impellers are polypropylene rated to 190F

From the spec sheet here:
MATERIALS IN CONTACT WITH SOLUTION:
MDX-3: Polypropylene, Kynar/Carbon Filled, Ryton/Teflon/Carbon, Stainless Steel, Buna N, Ceramic Magnet

809 is rated to 250F and impeller and housing are polysulfone and Ryton/Teflon/Carbon

Also on eBay here:
http://cgi.ebay.com/March-pump-FREE-S-H-/140496592835?pt=LH_DefaultDomain_0&hash=item20b63fdfc3

 

[noodles44x2]

Still have them? I would take one off your hands...