- Joined
- Mar 31, 2020
- Messages
- 42
- Reaction score
- 12
So, I received my Icemaster Max 4 and finally trying to set it up to work with my Anvil Brew Bucket cooling system. The issue I am having it the hose size going into the Icemaster max 4 is 3/8" and the hose going onto the Anvil Cooling system is 3/16" roughly. I tried a coupler from home depot John Guest PP221212WD as it with the only one I could find that would take both hoses, but it leaks immediately out of the quick disconnect end with the smaller hose. Not sure if there is a connector that will work with these 2 hoses to allow me to put the glycol through (just using water right now to test) or do I run the same 3/8" all the way to the smaller Anvil posts and just clamp the heck out of them? Any help would be much appreciated.