So I'm going to finally build a brew stand. I do 10 gallon all grain batches using kegs for all 3 vessels. I'm thinking I will do a two tier stand so I can get away with one pump and let the HLT gravity flow into the MLT. I currently have a low pressure burner that looks like this, the regulator says 10 psi and is adjustable.
I was thinking of using a hurricane burner on the kettle and two smaller burners similar to the one I have on the HLT and MLT. My initial thought was to use low pressure burners since I have the regulator already, but I'm not certain that low pressure can support the same amount of BTU's as high pressure. So I am currently thinking one of these
http://www.agrisupply.com/bg-high-pressure-cast-iron-burner/p/64494/
and two of these
http://www.agrisupply.com/high-pressure-cast-iron-burner-170000-btus/p/30295/
Are these the hurricane burners that suposedly put out 210000 BTUs?
I don't know which regulator to get this one says 1-15 psi but up to 750000BTU
http://www.agrisupply.com/high-pressure-regulator-with-out-relief-valve/p/36292/
This one is higher pressure 30 but only supports 145000 BTU
http://www.agrisupply.com/high-pressure-adjustable-regulator-valve/p/64484/
So it seems that neither is suitable. Also I need a tank fitting This one only supports 75000 BTU and I haven't found other.
http://www.agrisupply.com/qcc-quick-connect-propane-fitting/p/36449/
So what regulator would you guys suggest? Am I close or way off base?
I was thinking of using a hurricane burner on the kettle and two smaller burners similar to the one I have on the HLT and MLT. My initial thought was to use low pressure burners since I have the regulator already, but I'm not certain that low pressure can support the same amount of BTU's as high pressure. So I am currently thinking one of these
http://www.agrisupply.com/bg-high-pressure-cast-iron-burner/p/64494/
and two of these
http://www.agrisupply.com/high-pressure-cast-iron-burner-170000-btus/p/30295/
Are these the hurricane burners that suposedly put out 210000 BTUs?
I don't know which regulator to get this one says 1-15 psi but up to 750000BTU
http://www.agrisupply.com/high-pressure-regulator-with-out-relief-valve/p/36292/
This one is higher pressure 30 but only supports 145000 BTU
http://www.agrisupply.com/high-pressure-adjustable-regulator-valve/p/64484/
So it seems that neither is suitable. Also I need a tank fitting This one only supports 75000 BTU and I haven't found other.
http://www.agrisupply.com/qcc-quick-connect-propane-fitting/p/36449/
So what regulator would you guys suggest? Am I close or way off base?