B beauvafr Well-Known Member Joined Sep 9, 2012 Messages 508 Reaction score 5 Location Quebec Dec 26, 2013 #1 I'm stuck trying to loosen the posts of a ball-lock corny keg with my 22m wrench (good size). Too tight. The posts seems soldered over the old coke keg... Any tricks ?
I'm stuck trying to loosen the posts of a ball-lock corny keg with my 22m wrench (good size). Too tight. The posts seems soldered over the old coke keg... Any tricks ?
brew_ny Social_Misfit HBT Supporter Joined Apr 22, 2013 Messages 3,922 Reaction score 745 Location Charleston Four Corners Dec 26, 2013 #2 get a socket and a ratchet put a piece of pipe on it a couple feet long as a breaker bar or just use a breaker bar if you have one I know on pin locks sockets work the best even if you can get a wrench on it all the best S_M
get a socket and a ratchet put a piece of pipe on it a couple feet long as a breaker bar or just use a breaker bar if you have one I know on pin locks sockets work the best even if you can get a wrench on it all the best S_M
angrysparrow Well-Known Member Joined Dec 1, 2008 Messages 184 Reaction score 15 Dec 26, 2013 #3 +2 on socket+wrench. It's the right tool for the job.
OP OP B beauvafr Well-Known Member Joined Sep 9, 2012 Messages 508 Reaction score 5 Location Quebec Dec 26, 2013 #4 Got it !! I put the keg horizontally on the ground, on a carpet, while the wrench was still on the nut, 45 degree angle, and also touching the floor. You can imagine the rest of the story. I tough I was never gonna get it. My topper clone is now in the keg, and the sample I took on the tap taste just like sky. Happy holidays everyone!
Got it !! I put the keg horizontally on the ground, on a carpet, while the wrench was still on the nut, 45 degree angle, and also touching the floor. You can imagine the rest of the story. I tough I was never gonna get it. My topper clone is now in the keg, and the sample I took on the tap taste just like sky. Happy holidays everyone!