davidabcd
Detroit, Mi.
- Joined
- Jul 19, 2018
- Messages
- 3,327
- Reaction score
- 4,427
I am an extract/partial grain brewer. I brew four to six batches a year and I'm up to seventeen now. I take notes for every recipe. I enjoy short brew hours (not day). I use dry yeast but I don't hydrate it and I don't make starters. I follow the manufacturer's recommendations for the yeast strain and tweak them according to the recipe's style. One time I did use a smack-pack (that's as crazy as I get).
I only open the primary once: three weeks after brewing to verify FG. I do only use the plastic fermenter, with an airlock, and I’ve totally avoided ever needing a blow-off tube. Anyway, it's always three weeks no matter which style. I have hit my numbers, almost exactly, every time.
Much of this success I owe to the website here, so thank you.
I've only pooched one which, as you might logically expect, was the very first batch. I cut the muslin bag open mid-steep and stirred the grains around because they didn't seem to have enough room to steep. I somehow realized that this was a mistake, took who-knows-how-long to skim them out of the pot and into another muslin bag—a truly messy business. I know there are differing opinions, to a degree, about what I did next: I squeezed the grain bag until it was bone dry. But after everything I had done to ignore beer-making protocol, did it really matter? I recall putting many trays of ice cubes directly into the wort to cool it off (seemed like a solid idea at the time). Other than that, I kept checking the gravity, daily. I recall filling the carboy up to the neck with water, three or more times, because it kept bubbling over. I thought it was just a part of beer making. In retrospect, it was because I transferred to the carboy two days after the primary.
I think what follows is my most innovative error. I can’t believe I had almost forgotten! It had to do with my using the racking cane in a manner that defies logic. Instead of just starting a siphon with a gentle motion, I actually used the racking cane as a pump, literally. I had a good length of rubber hose attached from the proper end all the way to the bottom of the carboy. So far, so good. However, I stood over the primary and pumped the top piece up and down for the whole five gallons—“Swoosh! Swoosh! Swoosh!” It took quite a while and it was a whole lot of aerating at the wrong time. I remember thinking, while I was pumping away, “This doesn’t seem like a very valuable tool, if you ask me. In fact, it’s rather tedious and tiring.”
In spite of all the abuse I inflicted, amazingly, that first batch was still drinkable, kind of like a Newcastle but without brewing two separate beers and combing them or whatever their method is. For the record, I was trying to make a Bass clone.
Well, that’s my origin story. I’ll keep reading and so forth but I don’t know that I’ll post much because everything I know is already answered.
By the way, that pizza-making thread is amazing. I do love a good Detroit style pizza (Buddy’s, Cloverleaf, Loui’s, Detroit Style Pizza Co.)
Thanks,
David
I only open the primary once: three weeks after brewing to verify FG. I do only use the plastic fermenter, with an airlock, and I’ve totally avoided ever needing a blow-off tube. Anyway, it's always three weeks no matter which style. I have hit my numbers, almost exactly, every time.
Much of this success I owe to the website here, so thank you.
I've only pooched one which, as you might logically expect, was the very first batch. I cut the muslin bag open mid-steep and stirred the grains around because they didn't seem to have enough room to steep. I somehow realized that this was a mistake, took who-knows-how-long to skim them out of the pot and into another muslin bag—a truly messy business. I know there are differing opinions, to a degree, about what I did next: I squeezed the grain bag until it was bone dry. But after everything I had done to ignore beer-making protocol, did it really matter? I recall putting many trays of ice cubes directly into the wort to cool it off (seemed like a solid idea at the time). Other than that, I kept checking the gravity, daily. I recall filling the carboy up to the neck with water, three or more times, because it kept bubbling over. I thought it was just a part of beer making. In retrospect, it was because I transferred to the carboy two days after the primary.
I think what follows is my most innovative error. I can’t believe I had almost forgotten! It had to do with my using the racking cane in a manner that defies logic. Instead of just starting a siphon with a gentle motion, I actually used the racking cane as a pump, literally. I had a good length of rubber hose attached from the proper end all the way to the bottom of the carboy. So far, so good. However, I stood over the primary and pumped the top piece up and down for the whole five gallons—“Swoosh! Swoosh! Swoosh!” It took quite a while and it was a whole lot of aerating at the wrong time. I remember thinking, while I was pumping away, “This doesn’t seem like a very valuable tool, if you ask me. In fact, it’s rather tedious and tiring.”
In spite of all the abuse I inflicted, amazingly, that first batch was still drinkable, kind of like a Newcastle but without brewing two separate beers and combing them or whatever their method is. For the record, I was trying to make a Bass clone.
Well, that’s my origin story. I’ll keep reading and so forth but I don’t know that I’ll post much because everything I know is already answered.
By the way, that pizza-making thread is amazing. I do love a good Detroit style pizza (Buddy’s, Cloverleaf, Loui’s, Detroit Style Pizza Co.)
Thanks,
David